Rabu, 28 Oktober 2015

....AKAR MASALAH.....Kesultanan Sulu .....>>>

Tuesday, 5 March 2013

UPDATED 12.30 PM : http://kartikel.com/news/57609/updated-1230-pm-kumpulan-bersenjata-sulu-ditumpaskan-sepenuhnya

Kumpulan Bersenjata Sulu Ditumpaskan Sepenuhnya


Kumpulan bersenjata Sulu bersenjata telah ditumpaskan oleh pasukan keselamatan Malaysia dalam kejadian tembak-menembak secara besar-besaran bermula pukul 7 pagi Selasa, kata sumber polis.

Pasukan keselamatan Malaysia berada di peringkat keempat dalam Ops Sulu apabila mereka mengawal keselamatan kampung yang dikepung oleh kira-kira 100 lelaki bersenjata yang merupakan pengikut kepada seorang individu yang mendakwa dirinya sebagai Sultan Sulu, yang menegaskan bahawa saudaranya mengetuai kumpulan itu untuk berada di Tanduo sehingga mati walaupun tarikh akhir dilanjutkan yang diberikan kepada mereka untuk meninggalkan kawasan itu tanpa pertumpahan darah.

Rundingan untuk menyelesaikan pencerobohan, untuk dilakukan secara aman telah gagal dan pada pagi Selasa, jet pejuang terbang melakukan serangan, diikuti oleh pasukan polis elit yang turut menghadapi pertempuran itu.

Ketua Polis Negara memberitahu pemberita pada pukul 11.30 pagi bahawa tiada mangsa di kalangan rakyat Malaysia tetapi bilangan mangsa untuk lelaki bersenjata masih tidak diketahui.

Keadaan di semua bahagian pantai timur Sabah adalah terkawal oleh pihak polis dan tentera yang mengawal ketat keselamatan di beberapa lokasi strategi di mana mereka diancam oleh tindakan daripada pengikut Sultan Sulu bahawa akan berlakunya serangan balas sekiranya penceroboh Sulu dikalahkan.

Sumber

Isnin, 18 Februari 2013

Sejarah Yang Hilang: Kesultanan Sulu 

http://www.budakbenteng.com/2013/02/sejarah-yang-hilang-kesultanan-sulu.html

Kesultanan ini ini bermula bila seorang peranakan Arab Johor datang membuka pemerintahan selepas mengahwini seorang puteri tempatan atau 'dayang' di Sulu. Namanya Syed Abu Bakar Abirin.

Lebih kurang 100 tahun sebelum tu, ada seorang lelaki dari Minang, Sumatera namanya Raja Bagindo telah berdakwah kepada penduduk Sulu di mana sebelum tu ada tercatat nama Karim Al-Makdum, seorang pendakwah Arab datang membawa agama Islam kepada bekas wilayah emperium Srivijaya ini. Raja Bagindo menyambung usaha ulama Arab tu dan berjaya mengislamkan keseluruhan orang Tausug. Oleh sebab Minang dan Melayu ni adik beradik, maka ada satu pertalian misteri antara orang Tausug dan Melayu. Dari budaya dan bahasa dan macam-macam. Sebab tu bila Marcos latih anak Sulu supaya serang Malaysia, mereka tak mahu sebab sama agama dan serumpun.

Masa ni Kesultanan Sulu berkuasa di Sulu sahaja. Di Borneo,Sultan Brunei berkuasa. Tapi Brunei ni menghadapi macam-macam masalah sebab Borneo ni luas sangat. Satu lagi mereka terpaksa menghadapi penentangan suku-suku tempatan macam Dayak, Iban dan sebagainya. Ada kawasan yang mereka berjaya tundukkan, ada kawasan yang kejap ok kejap memberontak. Macam tu la sejak beratus-ratus tahun sejak era raja-raja Boni sehingga era Kesultanan Brunei.

Brunei dan Sulu ni pun ada pertalian misteri adik-beradik. Pangkal nama perempuan Brunei adalah 'dayang' dan ini juga dipakai di Sulu menunjukkan darjat tertentu.Padahal dalam kerajaan Melayu di semenanjung, dayang ni adalah pelayan wanita elit yang bertugas dalam istana raja.Ini menunjukkan ketika Emperium Srivijaya,ada satu 'clan' yang dilantik di kalangan orang-orang dari Borni dan Sulu atau sebelah kepulauan Filipina dengan gelaran2 tertentu.Contohnya 'Datu' dan 'Paduka' memang popular di Sulu dan Filipina. Juga gelaran Rajah dan Shariff.Shariff ini popular dalam masyarakat Islam.

'Awang' adalah pangkal nama lelaki di Brunei dan budaya ini anehnya ada di Kelantan. Raja-raja Melayu purba pernah berpusat di Kelantan, Kedah sehingga ke Segenting Kra. Pemerintahan Sri Dharmaraja sampai ke Pahang. Dalam petitih-petitih Siam era klasik ada mengatakan Siam itu sampai ke Pahang. Masa tu Siam ni tak identik dengan Ayutthaya tapi Sri Dharmaraja sebab ini kerajaan besar sebelum wujud Ayutthaya. Sultan Melaka pernah berperang dengan Maharaja Dewasura, ini pemerintah Pahang yang masih setia dengan Sri Dharmaraja. Maharaja Srivijaya mempunyai seorang anak nama Sanjaya dan dia inilah Aji Saka yang bawa kebudayaan Kelantan Kuno ke Jawa. Sebab itu ada wayang kulit dan kain batik kat Jawa. Dalam rekod Khmer, Sanjaya ialah Ajiraja.

Berbalik kepada Kesultanan Sulu, ada satu ketika Sultan Brunei hadapi satu pemberontakan dalam wilayahnya. Jadi Sultan Brunei minta saudaranya, Sultan Sulu bantu. Pemberontakan tahun 1703 tu berjaya diatasi. Sebagai hadiah, Sultan Brunei bagi timur Sabah pada Sultan Sulu. Inilah ALASAN yang dipakai oleh Macapagal dan Marcos nak tuntut Sabah dan sesetengah militan Sulu.

Nak tahu pasal apa James Brooke jadi Rajah Putih? Sebab Sultan Brunei tak mampu hadapi pemberontakan dan kekacauan dalam wilayahnya. Nampak? Beres masalah, bagi tanah kat orang lain. Selesai masalah, bagi tanah kat orang lain. Sebab apa? Sebab raja-raja Melayu masa tu kaya dengan tanah. Tanah ni satu 'matawang' yang paling high demand macam Dinar Kuwait dan bersifat universal. Satu lagi orang putih memang nakkan tanah untuk buat port dan kawal perdagangan.

Pada abad ke-19, Sepanyol mula serang Kesultanan Sulu. Akhirnya pada tahun 1851, Sulu dan Sepanyol buat penjanjian damai. Dalam perjanjian tu Sultan Sulu dipaksa mengakui kedaulatan Sepanyol atas Sulu.

Lepas tu, macam wabak penyakit, Sultan-sultan Sulu galak lepaskan wilayah pada para penjajah yang cekik darah. Mula-mula pajak tanah pada ejen British, Dent dan Overback lepas tu pada tahun 1903, Sultan Jamalul Kiram bagi terus Kempeni Borneo Utara.

Tapi yang paling menyusahkan ialah Sepanyol. Mereka tak henti2 kacau Sulu sampai ada satu perjanjian namanya Protokol Madrid yang 'absolutely' nak tuntut seluruh Kesultanan Sulu diberi pada conquistador ni.                                                                              
Lepas tu Amerika datang dan berperang pula dengan Sepanyol. Amerika ni baru nak naik ekor. Bayangan kuasa baru masa depan. Sedangkan British boleh kena halau masa Perang Kemerdekaan Amerika, apatah lagi Sepanyol si conquistador tua ni. Sepanyol kalah dan secara automatik seluruh Filipina dan Sulu bawah Uncle Sam.

Masa nilah Kesultanan Sulu ni terus terhapus. Ingatkan Amerika ni ok lagi dari Sepanyol, rupa-rupanya lagi kejam dan agresif. Banyak pembunuhan beramai-ramai telah dilakukan oleh tentera Amerika. Masa ni kerabat sultan memang tak dengar berita dah. Sejarah sultan-sultan Sulu jadi 'loophole' masa penjajahan Amerika ni. Ini jadi ALASAN segala bagai manusia yang mengaku waris sah Sultan Sulu. Lebih dua puluh orang mengaku waris sah Sultan Sulu dari pelbagai keluarga kesultanan sehingga wakil kerabat Sultan Sulu pun nak tumpang sekaki mengaku sultan juga.

Saya nak sentuh pasal kes tuntut tanah dengan alasan dahulu ia kepunyaan satu-satu pemerintahan. Dalam kes Filipina, dia tak boleh tuntut Sabah sebab dahulu tiada Filipina. Tanyala Kamaluddin, Alauddin atau Jamalul Kiram siapa Filipina? Filipina hanya wujud sejak 1898. Filipina menuntut Sabah melalui Kesultanan Sulu, padahal pernah ke Sultan Sulu duduk bawah Filipina? Tak pernah makhluk nama Filipina ni perintah Sultan Sulu sebab seluruh Kepuluan Filipina termasuk Sulu duduk bawah Sepanyol dan Amerika. Jadi Filipina dan Kesultanan Sulu=TIADA KAITAN.

Ini beza dalam kes Pulau Pinang. Sultan Kedah berhak tuntut Pulau Pinang sebab Kesultanan Kedah telah wujud sejak 1136 Masehi!  Perjanjian dengan Francis Light tu pun dengan Sultan Kedah, institusi yang sama. Apabila Malaysia merdeka dari British, maknanya automatik British serah balik seluruh haknya di sini pada Malaysia. Jadi segala perjanjian pelik raja-raja dulu terbatal. Dia reset balik. Ini beza dengan kes Filipina sebab yang sign penjanjian dengan Sepanyol atau Amerika bukan 'Sultan Filipina'.

Filipina ni macam tuntut tanah atas nama moyang orang lain. Sultan Kedah pula berhak tuntut tanah moyangnya dulu.

Ok, katakan ada 'Sultan Sulu' pada zaman moden ni tetiba je tuntut Sabah. Apa macam?

Tak boleh sebab Sabah dah diserah oleh Sultan Sulu pada penjajah lepas tu Sabah memilih merdeka bersama Malaysia.

Kedah boleh tuntut Pulau Pinang sebab perjanjian dah reset sejak merdeka.Sultan Kedah hanya bincang dengan Pusat (Malaysia) sebab British serah Tanah Melayu pada Malaysia. Jangan takut pada Francis Light. Sekarang Francis Light ada urusan yang sangat berat di alam barzah.

Dalam kes Sulu-Sabah, takde situasi 'reset' ni. Bila Sabah setuju merdeka dengan Malaysia, dia ada PERJANJIAN baru. Sultan Sulu kena defeat perjanjian ini malah perjanjian-perjanjian pelik yang lain, yang disetujui sendiri Sultan Sulu.

Kena panggil balik Sepanyol dan Amerika. Mungkin Sultan Brunei sekali dok bincang. Silap haribulan, Sultan Brunei pula tuntut Sabah pula.

Sebab itu saya merasa pelik dengan kes Batu Putih sebab sepatutnya Malaysia tuntut melalui Kesultanan Johor. Singapura nak tuntut melalui apa? Kerajaan Temasek?  Sebab Singapura Moden tak pernah jajah Batu Putih sebab diri dia sendiri kena jajah dengan British. Pulau tu patut kena tanya British dia buat perjanjian dengan siapa (of course Sultan of Johor).  Kalau saya deal dengan anda,  kenapa orang lain boleh tuntut barang saya. Hanya saya dan anda sahaja berhak dirujuk atas barang tersebut.

Sepak terajang sejarah ni...sekarang adalah trend untuk ambil tanah orang lain sesukahati. Sebab itu belajar sejarah tu penting supaya orang lain tak boleh tipu anda hidup-hidup ataupun setelah anda mati.

By Srikandi

Jamalul Kiram III Ulangi Tawaran Gencatan Senjata   http://www.carimember.com/ping/view/16100/jamalul-kiram-iii-ulangi-tawaran-gencatan-senjata


8-Mac- 2013: Jamalul Kiram III, yang mendakwa dirinya sebagai Sultan Sulu, mengulangi tawaran untuk mengadakan gencatan senjata selepas permintaan awal semalam ditolak oleh Malaysia.

Dipetik portal ABS-CBNnews Filipina, jurucakap Sultan Sulu mengemukakan tawaran kali kedua lewat semalam selepas ditolak oleh Perdana Menteri, Datuk Seri Najib Tun Razak dan Menteri Pertahanan, Datuk Seri Dr Ahmad Zahid Hamidi petang semalam.

"Kerajaan Malaysia menolak terus permintaan (diadakan gencatan senjata)... mandatnya sebelum mengiktiraf gencatan senjata unilateral yang dibuat oleh Sultan Sulu, mesti menyerah, kata mereka, 'militan' kepada mereka. Oleh itu, respons kepada itu, saya mahu mengulangi bahawa Kesultanan Sulu sekarang mengisytiharkan akan mengakhiri permusuhan secara unilateral," kata Abraham Idjirani, jurucakap Kesultanan Sulu.


Abraham juga berkata, pihaknya akan mengatur proses membebaskan tahanan - empat rakyat Malaysia yang terdiri daripada seorang anggota polis, dua anggota tentera dan seorang pegawai kerajaan jika gencatan senjata dipersetujui oleh Putrajaya.

"Kami ingin memasukkan pengumuman menamatkan permusuhan bahawa Kesultanan Sulu, di bawah kepimpinan Sultan Jamalul Kiram III, bersedia untuk tukar tahanan perang," katanya lagi.


"Pasukan Keselamatan Diraja (di Lahad Datu) tidak ada tahanan tetapi rakyat yang bangkit di Semporna ada, jadi kami akan minta mereka. Kami akan mendesak mereka patuh mandat Pertubuhan Bangsa-bangsa Bersatu," katanya lagi.

Semalam, Najib menegaskan bahawa Kuala Lumpur tidak akan menimbang sebarang permintaan gencatan senjata selagi kumpulan penceroboh militan tidak meletak senjata tanpa syarat.


Najib, yang melawat Sabah selepas tiga hari pasukan keselamatan melancarkan serangan terhadap kumpulan penceroboh bersenjata di Lahad Datu, berkata Presiden Filipina Benigno Aquino III telah menghubungi beliau untuk mendapatkan reaksi Malaysia berhubung kenyataan Jamalul mengenai gencatan senjata.

"Saya bagi tahu Presiden Aquino bahawa mereka perlu letak senjata tanpa syarat dan senjata itu perlu diserah kepada kita," katanya.

Jamalul meminta pihaknya meletak senjata di Lahad Datu selepas beberapa anggota kumpulannya terbunuh dalam gerakan ofensif pasukan keselamatan Malaysia.

//--Sinar Harian | +Mencari Sinar KasihMu.. 

 

Raja Muda Sulu mati ditembak ?







LAHAD DATU - http://www.carimember.com/ping/view/16088/raja-muda-sulu-mati-ditembak/
Saki-baki kumpulan pengganas Sultan Sulu diyakini berada dalam keadaan lemah ekoran Jeneral Raja Muda Azzumuddie Kiram yang mengetuai pencerobohan di Sabah terbunuh bersama 31 anggotanya dalam pertempuran di Kampung Tanduo dan Kampung Tanjung Batu di sini.

Sehingga semalam, jumlah musuh yang terbunuh sejak pertempuran bermula pada 1 Mac lalu seramai 52 orang. Bagi pihak pasukan keselamatan pula seramai lapan pejuang negara gugur.

Bagaimanapun, dalam pertempuran terbaharu kelmarin dan semalam, tiada kematian atau kecederaan dialami pihak pasukan keselamatan.

Ketua Polis Negara, Tan Sri Ismail Omar berkata, 31 daripada pengganas termasuk seorang ketua puak musuh yang berpangkat Jeneral maut dalam pertempuran yang berlaku di Kampung Tanjung Batu petang kelmarin.

Seorang lagi pengganas berjaya ditembak mati pasukan keselamatan dalam pertempuran di Kampung Tanduo pada pukul 11 pagi semalam.

"Sejak petang semalam (kelmarin) hingga pukul 11 pagi ini (semalam) pasukan keselamatan terlibat dalam beberapa pertempuran di Kampung Tanjung Batu dan sekitar Kampung Tanduo," kata beliau pada sidang akhbar di sini semalam.

Ismail bagaimanapun enggan mengesahkan status seorang Jeneral yang terbunuh ialah Azzumuddie yang merupakan adik kepada Sultan Sulu, Jamalul Kiram III.

"Setakat ini kita belum dapat mengesahkan identiti Jeneral yang terbunuh berikutan keadaan yang berisiko dan membahayakan anggota keselamatan bagi mengeluarkan mayat-mayat pengganas yang terbunuh," kata beliau.
kosmo

Sultan Sulu: Saya Sultan Termiskin di Dunia (bagian 2/habis)

Jumat, 08 Maret 2013, 06:44 WIB

globalnation.inquirer.com
Sultan Sulu Jamalul Kiram III

Oleh Rr Laeny Sulistyawati

REPUBLIKA.CO.ID, 

Sultan Sulu Jamalul Kiram III  mengerti betul kalau sejak tahun 1963, keluarga kesultanan Sulu menyewakan tanah seluas 75 kilometer persegi kepada Malaysia.

Sultan merasa  biaya sewa tahunan yang dibayar Malaysia tergolong kecil, yaitu  5.300 ringgit Malaysia atau sekira  1.708 dolar Amerika Serikat (AS). 

Untuk itu, Kiram ingin merebut kembali wilayah Sabah. Dia memerintahkan pengikutnya memasuki Sabah dan merebut kembali wilayah itu. Sedikitnya 150 loyalis Kiram memasuki wilayah Sabah sejak 9 februari lalu.

Praktis, terjadi baku tembak antara kedua belah pihak pada Jumat (1/3). Terdapat 14 korban tewas, dua diantaranya adalah pasukan Malaysia.

Pertempuran kembali terjadi pada Selasa (5/3). Saat itu Malaysia menggempur Distrik Lhad Datu, bagian Timur Sabah. Mereka juga mencari sekira 200 warga Filipina yang diyakini bersembunyi di sekitar perkebunan.  

Hingga kini, situasi di Malaysia masih memanas. Baru-baru ini, polisi Malaysia menemukan enam yang petugas polisi Malaysia yang tewas di Kampung Simunul ,di Semporna, Sabah dengan kondisi dimutilasi, Rabu (6/3). 

Mereka diyakini tewas pada Sabtu (2/3).  Dikabarkan , mayat itu dalam kondisi yang mengenaskan, ada yang kepalanya dipenggal dan matanya dicungkil.

Tapi kepala kepolisian Malaysia Inspektur jenderal Ismail Omar menolak untuk mengonfirmasi laporan laporan itu. Malaysia bersumpah untuk menghancurkan seluruh anggota Kesultanan Sulu yang menduduki Sabah.

Tapi, kesultanan Sulu berubah sikap. Mereka menyerukan gencatan senjata. "Sultan Kiram menyerukan gencatan senjata sepihak dari Kesultanan Sulu, efektif mulai Kamis pukul 12.30 (waktu setempat),’’ kata juru bicara Sultan Sulu Abraham Idjirani seperti dikutip dari The Star, Kamis (7/3) kemarin.

Perdana Menteri Malaysia Datuk Seri Najib Tun Razak mengatakan, Malaysia menolak untuk gencatan senjata. Kini kondisi Sabah semakin memanas. Korban yang tewas akibat konflik ini sedikitnya 30 orang. 

Konflik ini pun sampai mendapat perhatian dari organisasi duinia. Sekretaris jenderal Perserikatan Bangsa-Bangsa(PBB) Ban Ki-Moon menyerukan  supaya kekerasan di Sabah segera diakhiri dan memulai dialog. 
Redaktur A.Syalaby Ichsan
Sumber : Associated Press

Malaysia Jamin Keamanan TKI di Sabah

Kamis, 07 Maret 2013, 09:23 WIB

REUTERS/Bazuki Muhammad 
Polisi Malaysia memeriksa kendaraan yang lewat di daerah Sabah, Malaysia

REPUBLIKA.CO.ID, NUNUKAN -- Pemerintah Malaysia memberikan jaminan keamanan kepada warga negara Indonesia yang bekerja di Sabah. Ini menyusul menghangatnya konflik antara kelompok bersenjata dari Filipina Selatan dengan pemerintah Malaysia.

"Ratusan TKI yang terkena dampak konflik tersebut telah diungsikan ke tempat yang dianggap aman. Masih di kawasan Felda Plantation, milik pemerintah Malaysia," kata Konsul RI di Tawau Malaysia, Mohammad Soleh, Kamis (7/3). 

Selain itu, katanya, aparat keamanan Malaysia dan pemerintah Sabah telah membuat suatu perjanjian tertulis. Perjanjian itu menyatakan mereka menjamin keamanan WNI yang bekerja di negeri bagian tersebut. 

Soleh juga menjelaskan, kebutuhan sehari-hari TKI yang saat ini dalam pengungsian tetap dalam tanggungan pihak perusahaan Felda Plantation.

"Kita sudah bicarakan semuanya dengan pihak perusahaan (Felda Plantation. Mereka berjanji siap menjamin kebutuhan sehari-harinya selama dalam pengungsian," ujar dia.

Menurutnya, TKI yang diungsikan belum bisa bekerja terkait kondisi keamanan yang belum menentu di Sabah.

Ia pun membantah adanya ratusan TKI yang diungsikan ke Konsulat RI di Tawau dan dikembalikan ke Kabupaten Nunukan, Kalimantan Timur. Menurutnya, hal itu tidak mungkin mengingat jarak antara Tawau dengan lokasi konflik sangat jauh, yakni sekitar 400 kilometer. 

"Tidak benar akan dilakukan pemulangan TKI besar-besaran. Kalau pun memang ada yang pulang ke kampung halamannya, merupakan insiatif sendiri," katanya.
Redaktur : Mansyur Faqih
Sumber : Antara
3.915 reads
Orang-orang yang beriman dan berhijrah serta berjihad di jalan Allah dengan harta, benda dan diri mereka, adalah lebih tinggi derajatnya di sisi Allah; dan itulah orang-orang yang mendapat kemenangan.(QS At Taubah ( 9:20))
  Isi Komentar Anda
Komentar adalah tanggapan pribadi, tidak mewakili kebijakan redaksi republika.co.id. Redaksi berhak mengubah atau menghapus kata-kata yang tidak etis, kasar, berbau fitnah dan pelecehan, intimidasi, bertendensi suku, agama, ras, dan antar golongan. Setiap komentar sepenuhnya menjadi tanggung jawab pengirim.

Republika.co.id berhak untuk memberi peringatan dan atau menutup akses bagi pembaca yang melanggar ketentuan ini.

Jumat, 23 Oktober 2015

Mainland China has 27 nuclear power reactors in operation, 24 under construction, and more about to start construction. Additional reactors are planned, including some of the world's most advanced, to give more than a three-fold increase in nuclear capacity to at least 58 GWe by 2020-21, then some 150 GWe by 2030, and much more by 2050. The impetus for increasing nuclear power share in China is increasingly due to air pollution from coal-fired plants. China’s policy is for closed fuel cycle. China has become largely self-sufficient in reactor design and construction, as well as other aspects of the fuel cycle, but is making full use of western technology while adapting and improving it. China’s policy is to ‘go global’ with exporting nuclear technology including heavy components in the supply chain. ..>> .... Most of mainland China's electricity is produced from fossil fuels, predominantly from coal. Two large hydro projects are recent additions: Three Gorges of 18.2 GWe and Yellow River of 15.8 GWe. In 2012 gross electricity generation was 4994 TWh (not including Hong Kong) on IEA figures, this being 3785 TWh from coal, 86 TWh from gas, 97 TWh from nuclear, 872 TWh from hydro, and 147 TWh from non-hydro renewables. Net export to Hong Kong was 10 TWh, adding to its 39 TWh generation (27 TWh from coal, 11 TWh from gas). Rapid growth in demand has given rise to power shortages, and the reliance on fossil fuels has led to much air pollution. The economic loss due to pollution is put by the World Bank at almost 6% of GDP,1 and the new leadership from March 2013 has prioritised this.* Chronic and widespread smog in the east of the country is attributed to coal burning....>>>....... The February 2015 edition of the BP Energy Outlook 2035 projects that by 2035 China becomes the world’s largest energy importer, overtaking Europe, as import dependence rises from 15% to 23%. China’s energy production rises by 47% while consumption grows by 60%. China’s fossil fuel output continues to rise with increases in natural gas (+200%) and coal (+19%) more than offsetting declines in oil (-3%). China’s CO2 emissions increase by 37% and by 2035 will account for 30% of world total with per capita emissions surpassing the OECD by 2035. The distribution of energy resources relative to demand poses some challenges, notably for north-south coal transport and east-west power transmission. Electricity consumption in 2012 rose only 5.5% to 4.9 trillion kWh, and it was expected to grow between 6.5% and 8.5% in 2013. In 2011 it rose 11.7% to 4693 billion kWh, according to the China Electricity Administration. Its 2010 increase of 14.56% to 4190 billion kWh corresponded with a 10% growth in GDP, according to the China Electricity Council. Some 3090 billion kWh of this (74%) was in industry. Nuclear power contributed 2.4% of the total production in 2014 – 123.8 billion kWh according to the IAEA. Per capita electricity consumption was 3510 kWh in 2012. By 2030 it is expected to be 5500 kWh/yr and by 2050 about 8500 kWh/yr......>>> SO.. DO INDONESIA WANT TO BE A NUCLEAR POWER PLANT COUNTRY..?? >> WHY SO LONG THINKING.. THE NUKE DEVELOPMENT IN INDONESA...THAT HAVE THE SUFFICIENT MINERAL FOR THE COMING NUKE COUNTRY..?? FOR THE MOMENT NO ONE COMMENT..?? BUT THE NEED OF THE NUKE POWER IS SO LARGE AND POSSIBLE... BECOME THE NUKE COUNTRY...?? MAY ALLAH BLESS AND GIFT HIDAYAH FOR THE PEOPLE AND THE SUPORTIVE... THE NUKE DEVELOPMENT IN INDONESIA.. IN THE VERY SOON TIME.. AAMEEN.... >>> ....Chinese companies will be allowed to take a stake in the UK's next generation of nuclear power plants following the signing of a new memorandum of understanding (MoU) on nuclear cooperation by the two countries....>>

China cleared to buy into UK nuclear plants

17 October 2013
Chinese companies will be allowed to take a stake in the UK's next generation of nuclear power plants following the signing of a new memorandum of understanding (MoU) on nuclear cooperation by the two countries.
http://www.world-nuclear-news.org/NP-China_cleared_to_buy_into_UK_nuclear_plants-1710137.html
 
 UK-China MOU signing (HM Treasury)_460
Lord Deighton and Xu Yongsheng shake hands on the conclusion of the MoU (Image: HM Treasury)

UK Chancellor George Osborne described the step as "an important potential part of the government's plan for developing the next generation of nuclear power in Britain." He announced the development during a visit to the Taishan site in southern China, where two French-designed EPR reactors are being built through collaboration between EDF and the China General Nuclear Power Company (CGN).
"Closer cooperation with world’s fastest growing nuclear nation presents substantial opportunities for UK companies with expertise, skills and long experience in nuclear technology."

Lord Hutton, NIA chairman

Chinese companies could eventually become majority stakeholders in new UK nuclear plants, although initially they are only anticipated to take minority stakes, the UK treasury has said. It further noted that any investment from any country must comply with rigorous UK regulatory standards.
French company EDF owns and operates all but one of the UK's currently operating nuclear power plants through its EDF Energy subsidiary. The company is planning to build new EPR plants in the UK at Hinkley Point C and at Sizewell C, and has been involved in long negotiations with the UK government over market conditions prior to making an investment decision on the former.
Amid widespread speculation of an imminent announcement the UK's Department of Energy and Climate Change has today confirmed that negotiations between Government and EDF Group on the potential terms of an investment contract for Hinkley Point C remain ongoing and that an agreement has yet to be finalised, contradicting earlier media reports that a deal had been agreed.
CGN has been discussed as a possible investor in Hinkley Point since UK gas supplier Centrica pulled out of its nuclear new-build joint venture with EDF Energy earlier this year. Chinese companies including CGN have also been suggested as possible bidders for Horizon Nuclear Power, which holds two further sites approved for UK new build projects.
Lord Hutton, chairman of UK industry body the Nuclear Industry Association, said the announcement was evidence of the attractions of the UK nuclear market to overseas investors. "Closer cooperation with world’s fastest growing nuclear nation presents substantial opportunities for UK companies with expertise, skills and long experience in nuclear technology," he said.

China-UK cooperation


The MoU, signed by UK treasury secretary Lord Deighton and Xu Yongsheng, head of China's National Energy Administration, sets the strategic framework for collaboration on investment, technology, construction and expertise. As well as supporting Chinese investment in Britain, the UK Treasury says it will also ensure that UK companies can be part of the nuclear new-build program in what Osborne described as "the world's fastest growing civil nuclear power."
Further to the MoU, UK-based International Nuclear Service has also signed an agreement with Chinese Nuclear Power Engineering Company Ltd to share UK experience on radioactive waste management, under which Chinese technicians will begin initial training activities in the UK later this month.
Researched and written
by World Nuclear News



21 October 2015
http://www.world-nuclear-news.org/NN-China-agrees-to-invest-in-new-UK-nuclear-plants-2110155.html

China agrees to invest in new UK nuclear plants


China has agreed to take a one-third stake in the project to build a new nuclear power plant at Hinkley Point in the UK and to take shares in two further plants. A final investment decision for the Hinkley project by EDF Energy is expected by the end of the year.

Hinkley Point C vision (EDF Energy) 460x266
An artist's impression of how Hinkley Point C could appear (Image: EDF Energy)

Under a deal agreed during the second day of a state visit by Chinese president Xi Jinping to the UK, China General Nuclear (CGN) will invest £6 billion ($9 billion) in EDF Energy's project to construct the Hinkley Point C plant.
Under the Strategic Investment Agreement signed today, EDF's share in project will be 66.5% and CGN's will be 33.5%. EDF said it intends to offer other investors stakes in the £18 billion ($28 billion) project, but will keep at least a 50% stake itself.
CGN will make its investment in the UK through its new company called General Nuclear International.
EDF Energy said "Today's signing paves the way for the Hinkley Point C project to go ahead and sets the steps for a final investment decision." This will be subject to: finalisation of "long form documentation" based on the Head of Terms agreed today; finalisation by EDF of its financing plan; approval by the boards of both EDF and CGN; and, clearance by merger control and other governmental authorities in China and Europe.
The Hinkley Point C plant - the first new nuclear power station built in the UK in almost 20 years - will comprise two EPR reactors, with first operation scheduled for 2025. Together, the two reactors will provide about 7% of the UK's electricity.

Beyond Hinkley


EDF and CGN have also agreed the Heads of Terms of a wider UK partnership for the joint development of new nuclear power plants at Sizewell in Suffolk and Bradwell in Essex. EDF said terms will be in final form before the final investment decision for Hinkley Point C.
EDF said the two companies have agreed to develop the Sizewell C project to the point where a final investment decision can be made, with a view to building and operating two EPR reactors there. During this development phase, EDF will take an 80% share while CGN will take a 20% share.
At Bradwell, the two companies will form a joint venture company to seek regulatory approval - through the Generic Design Assessment (GDA) process - for a UK version of the Chinese-designed Hualong One reactor. CGN is expected to take a 66.5% share and EDF 33.5%. The two companies will also bring Bradwell B to a final investment decision.
In October 2013, following the signing of a new memorandum of understanding on nuclear cooperation by Britain and China, the UK Treasury confirmed that Chinese companies could eventually become majority stakeholders in new UK nuclear plants, although initially they are only anticipated to take minority stakes. It further noted that any investment from any country must comply with rigorous UK regulatory standards.
CGN had been discussed as a possible investor in Hinkley Point since UK gas supplier Centrica pulled out of its nuclear new-build joint venture with EDF Energy in early 2013.
Last month, the UK government announced up to £2 billion ($3 billion) in support for the planned Hinkley Point C nuclear power plant.
In an article published in the UK newspaper The Daily Telegraph on 22 September, EDF Energy CEO Vincent de Rivaz said, "The economic benefits of China's investment in our new nuclear plants will be shared among businesses and workers across the country." He noted that the Hinkley Point C project will mark the "biggest inward investment in British history" with the creation of up to 25,000 jobs during the plant's construction. "Some of these jobs will be in Somerset but many more will be created across the rest of the country, with British companies on target to win contracts worth more than 60% of the value of Hinkley Point C's construction." He added, "New nuclear projects won't just boost British industry and skills here, they will also help the UK and France compete and win in a global market."
EDF chairman Jean-Bernard Levy said, "Today marks a big step forward for EDF's 30 year partnership with our Chinese partner CGN. Our ambitious nuclear projects are strongly supported by the governments of the UK, China and France and they will bring benefits to all three countries."
CGN chairman He Yu said, "Entering the UK's nuclear market marks a new phase for CGN. At the same time this is also a triple-win for the existing nuclear energy partnership between China, France and the UK."
The announcement was welcomed by industry.
Lord John Hutton, chairman of the UK's Nuclear Industry Association said: "This will be the first new nuclear power station to be built in a generation and the first to be built without state funding. This major infrastructure project will give a vital boost to British industry, creating jobs and prosperity in the south west, as well as important opportunities for the UK's construction and manufacturing industry."
World Nuclear Association director general Agneta Rising said, "New nuclear construction around the world is at the highest level for 25 years, but we need to see more countries learning from the UK's example to support nuclear energy among a mix of generation technologies that are fit for the future. Governments must act to ensure that markets support new investment in technologies such as nuclear; the UK is showing one way this can be achieved."
Researched and written
by World Nuclear News



Nuclear Power in Indonesia

(Updated June 2015)
http://www.world-nuclear.org/info/Country-Profiles/Countries-G-N/Indonesia/
  • Indonesia has a greater depth of experience and infrastructure in nuclear technology than any other southeast Asian country except Australia.
  • A 10 MWe experimental nuclear power plant is planned to be built at Serpong, near Jakarta. Plans for larger units are delayed.
Indonesia's population of 242 million is served by power generation capacity of only 35 GWe, producing 196 billion kWh in 2012. Of this, 95 TWh came from brown coal, 33 TWh from oil, 45.5 TWh from gas, 13 TWh from hydro and 9 TWh from geothermal. It has per capita electricity consumption of around 500 kWh/yr, but 36% of the population in 2013 have no access to electricity. The government has targeted a 26% reduction in CO2 emissions by 2020.
With an industrial production growth rate of 10.5%, electricity demand is estimated to reach 450 billion kWh in 2026. At present a low reserve margin with poor power plant availability results in frequent blackouts. The Java-Bali grid system accounts for more than three quarters of Indonesia's electricity demand – 132 TWh in 2012. PT PLN (Persero), the Indonesia Electricity Corporation, projects 55 GWe new capacity by 2021, 38 GWe of this coal-fired. It also plans major grid enhancements on Java, on Sumatra, and Kalimantan, with a HVDC link Sumatra to Java.
About 40% of Indonesia's electricity is generated by oil and gas, so as well as catering for growth in demand in its most populous region, the move to nuclear power will free up oil for export. However, in mid-2012 the National Energy Council (DEN) said that nuclear power was an unlikely last resort in the country.

Nuclear proposals

Following earlier tentative proposals, in 1989 the government initiated a study focused on the Muria Peninsula in central Java and carried out by the National Atomic Energy Agency (BATAN – Badan Tenaga Nuklir Nasional) established in 1958. It led to a comprehensive feasibility study for a 7000 MWe plant, completed in 1996, with Ujung Lemahabang as the specific site, selected for its tectonic stability. Plans for the initial plant on the Muria Peninsula in central Java were then deferred indefinitely early in 1997. A National Nuclear Act was passed in 1997.
Then a 2001 power generation strategy showed that introduction of a nuclear plant on the 500 kV Java-Bali grid would be possible in 2016 for 2 GWe rising to 6-7 GWe in 2025, using proven 1000 MWe technology with investment cost $2000/kWe. The Java-Bali interconnected system accounts for more than three quarters of Indonesia's electricity demand.
Under the 2006 National Electricity Planning Scheme 2006-26 and Presidential Decree #43 in 2006 the project may be given to an Independent Power Producer to build and operate. Sites on the central north coast of Java were then under consideration, with access to the country’s main grid infrastructure. Plans were to call tenders in 2008 for two 1000 MWe units, Muria 1&2, leading to decision in 2010 with construction starting soon after and commercial operation from 2016 and 2017, but these plans were put on hold. Fuel services would be purchased from abroad and fuel would preferably be leased. Used fuel would be stored centrally in the medium term.
The government said that it had $8 billion earmarked for four nuclear plants of total 6 GWe to be in operation by 2025, and aimed to meet 2% of power demand from nuclear by 2017. It is anticipated that nuclear generation cost would be about 4 cents/kWh (US) compared with 7 c/kWh for oil and gas.
In mid-2010 three sites were being considered for main plants: Muria (central Java, actually 3 locations), Banten (west Java) and Bangka Island (off southern Sumatra to NE, 2 locations: West Bangka and South Bangka). All are on the north shores, away from the tectonic subduction zone. Over 2011-13 BATAN undertook a feasibility study for Bangka, and it signed an agreement with the Bangka-Belitung provincial government. Bangka is far from any active volcano, has low seismic hazard, no tsunami hazard (shallow sea), and low population. Site evaluation of Muntok, West Bangka and Permis, South Bangka, showed both to be suitable for some 10 GWe capacity meeting 40% of the demand in Sumatra, Java and Bali. Most of this capacity would be at the West Bangka site, with 600 MWe at Permis. After a change in provincial government, these Bangka sites receded from immediate consideration. 
BATAN’s focus in 2013 shifted to West Kalimantan, using small reactor units suited to the relative lack of grid infrastructure there and where most electricity is imported from Malaysia. Six designs were being evaluated. In November 2013 the Research & Technology Ministry (RISTEK) affirmed its intention of building a small (eg 30 MWe) power reactor, at an unspecified place, possibly from 2015. 
In May 2015 the Energy & Mineral Resources ministry said that a feasibility study on building a nuclear power plant at Bangka-Belitung had been completed and another was under way for Kalimantan. The question of whether such a plant would be under PT PLN or private remains open. 
In December 2013, on the 55th anniversary of founding BATAN, the minister said that a non-commercial power reactor (RDNK) and a gamma irradiation facility would be built by BATAN at Serpong, the site of its largest research reactor, and in February 2014 he was quoted as saying that a 30 MW experimental nuclear power reactor would be built by BATAN at Serpong, near Jakarta.
Prior to the introduction of large commercial reactors in Indonesia, BATAN is planning to build a test and demonstration high-temperature gas-cooled reactor (HTR) of up to 10 MWe. This is with a view to a number of 100 MWe units following in Kalimantan, Sulawesi and islands. Construction of the demonstration unit is expected to take four years, with the start of operation after 2020.
In April 2015 Rusatom announced that a consortium of Russian and Indonesian companies led by NUKEM Technologies had won a contract for the preliminary design of the multi-purpose 10 MWe HTR in Indonesia, which would be “a flagship project in the future of Indonesia’s nuclear program.” It will be a pebble-bed HTR at Serpong. NUKEM is already involved with fuel for the research reactors there, and it has considerable expertise in HTRs from Germany and South Africa. The reason for deciding on an HTR is that there is more potential for process heat. Atomstroyexport, OKBM and SRI SIA Luch are involved. The contract covers a feasibility study on the conceptual design and the basic design documentation. These are expected to be completed by January 2016, according to Rusatom, and will lead to a tender for construction of the reactor. 
According to JAEA, BATAN published plans in June 2014 for two 1000 MWe LWR reactors on Java, Madura or Bali from 2027, and for two more in Sumatra (Bangka?) from 2031. This is unconfirmed from BATAN but is reported in connection with the HTR agreement.

International support for Indonesian plans

Russia's Rosatom signed a memorandum of understanding on the peaceful uses of nuclear energy with BATAN in June 2015. This is designed to lead to other areas of cooperation beyond the HTR project, including the possibility of constructing Russian nuclear power units in Indonesia.
In July 2007 Korea Electric Power Corp. and Korea Hydro & Nuclear Power Co. (KHNP) signed a memorandum of understanding with Indonesia's PT Medco Energi Internasional to progress a feasibility study on building two 1000 MWe OPR-1000 units from KHNP at a cost of US$ 3 billion. This was part of a wider energy collaboration.
In addition, BATAN has undertaken a pre-feasibility study for a small Korean SMART reactor for power and desalination on Madura island. However, this awaits the building of a reference plant in Korea. Also the province of Gorontalo on Sulawesi was reported to be considering a floating nuclear power plant from Russia, and late in 2007 a cooperation agreement with Japan was signed, envisaging its help in building and operating nuclear power plants.
The Japanese and Indonesian governments signed a cooperation agreement in November 2007 relating to assistance to be provided for the preparation, planning, and promotion of Indonesia's nuclear power development and assistance for public relations activities. In August 2014 the Japan Atomic Energy Agency (JAEA) announced that it has agreed to extend this cooperation agreement with BATAN to include research and development of high-temperature gas-cooled reactors (HTRs).
The IAEA has been reviewing the safety aspects of both Muria and Madura proposals, with Indonesia's Nuclear Energy Regulatory Agency – Badan Pengawas Tenaga Nuklir (BAPETEN). It was then looking at the Bangka sites. BAPETEN was established in 1998 and reports directly to the President.
In November 2009 the IAEA undertook an Integrated Nuclear Infrastructure Review mission to Indonesia. Against 19 parameters, ‘no actions needed’ on six, ‘significant actions needed’ on three, and the rest ‘minor actions needed’. In respect to IAEA milestones, the country is at the first: ‘ready to make a knowledgeable commitment’. During the 1980s many technical people were trained in anticipation of nuclear power development then, many of these are still available for the new project.
Russia is keen to export floating nuclear power plants (FNPP), on a fully-serviced basis, to Indonesia as a means of providing power to its smaller inhabited islands.

Public opinion

In December 2013 RISTEK reported the results of a poll conducted by an independent agency PT Iconesia Solution. Community acceptance in Indonesia is increasing, and 76.5% agreed with the development of nuclear science and technology, while 60.4% agreed with developing a nuclear power plant in the country.

R&D

Indonesia has a number of nuclear-related facilities in operation. BATAN operates three research reactors: in Serpong, Banten on the western outskirts of Jakarta (30 MW), Bandung, west Java (2 MW), and in Yogyakarta, central Java (100 kW).
The Serpong multipurpose reactor, which started up in 1987, is intended to support the introduction of nuclear power to the country. It is in the Litbangyasa Serpong Nuclear Zone, located in the Research Centre for Science and Technology (PUSPIPTEK), Serpong. The main facility here is the 30 MW Multipurpose Reactor GA. Siwabessy (RSG-GAS), but also there are the Centre for Reactor Technology and Nuclear Safety (PTRKN), Centre for Development of Nuclear Informatics (PPIN), Nuclear Device Engineering Centre (NEDC), Radioisotope Radiofarmaka Centre (PRR), Materials Technology Centre for Nuclear Fuel (PTBGN), Radioactive Waste Technology Centre (PTLR), Nuclear Industrial Materials Technology Centre (PTBIN), Centre for Standardization and Nuclear Quality Assurance (PSJMN), and the Centre for Nuclear Technology Partnership (PKTN).
A Government-owned company, PT Batan Teknologi, produces medical and industrial isotopes (including Mo-99) for domestic needs using the facilities in Serpong.
At Yogyakarta, as well as the 100 kW Kartini research reactor there is the Teknologi Accelerator and Process Materials Centre (PTAPB) and the College of Nuclear Technology (STTN). At Bandung the country’s first research reactor was built in 1965, a small Triga mkII which was subsequently boosted to 2 MW, and the site also hosts the Nuclear Materials Technology and Radiometric Centre (PTNBR) where nuclear medicine in the country was established. Friday Market in Jakarta is a larger nuclear establishment, with Isotopes and Radiation Technology Applications Centre (PATIR), Technology Centre for Radiation Safety and Metrology (PTKMR), Nuclear Geology Development Centre (PPGN), Centre for Education and Training, and the Centre for Nuclear Science and Technology Dissemination (PDIN).
The country also has front-end capabilities in ore processing, conversion and fuel fabrication, all at a laboratory scale, though PT Batan Teknologi assembles fuel elements for the research reactors using imported US fuel. There have been no experiments in reprocessing, but BATAN operates a radwaste program including for spent fuel from the research reactors.

Uranium

There are some uranium resources in Kalimantan, and possibly West Papua. BATAN in September 2010 quoted 53,000 tonnes as high-cost resources: 29,000 t in West Kalimantan and 24,000 t in Bangka Belitung, including some associated with rare earths in monazite by-product from tin mining.

International agreements and non-proliferation

Indonesia's safeguards agreement with the IAEA under the NPT entered force in 1980 and the Additional Protocol entered force in 1999. In 1997 it signed the Joint Convention on the Safety of Spent Fuel Management and Radioactive Waste Management.

References:

BATAN 2012 summary of situation for IAEA
Rusatom 17/4/15, www.rosatom.ru/journalist/news/c9232180480bf2f1a795af608de3ffe0



Power | Czech Republic | Denmark | Finland | France
http://www.world-nuclear.org/info/Country-Profiles/Countries-A-F/China--Nuclear-Power/ 

Nuclear Power in China

(Updated October 2015)
  • Mainland China has 27 nuclear power reactors in operation, 24 under construction, and more about to start construction.
  • Additional reactors are planned, including some of the world's most advanced, to give more than a three-fold increase in nuclear capacity to at least 58 GWe by 2020-21, then some 150 GWe by 2030, and much more by 2050.
  • The impetus for increasing nuclear power share in China is increasingly due to air pollution from coal-fired plants.
  • China’s policy is for closed fuel cycle.
  • China has become largely self-sufficient in reactor design and construction, as well as other aspects of the fuel cycle, but is making full use of western technology while adapting and improving it.
  • China’s policy is to ‘go global’ with exporting nuclear technology including heavy components in the supply chain.
Most of mainland China's electricity is produced from fossil fuels, predominantly from coal. Two large hydro projects are recent additions: Three Gorges of 18.2 GWe and Yellow River of 15.8 GWe. In 2012 gross electricity generation was 4994 TWh (not including Hong Kong) on IEA figures, this being 3785 TWh from coal, 86 TWh from gas, 97 TWh from nuclear, 872 TWh from hydro, and 147 TWh from non-hydro renewables. Net export to Hong Kong was 10 TWh, adding to its 39 TWh generation (27 TWh from coal, 11 TWh from gas). Rapid growth in demand has given rise to power shortages, and the reliance on fossil fuels has led to much air pollution. The economic loss due to pollution is put by the World Bank at almost 6% of GDP,1 and the new leadership from March 2013 has prioritised this.* Chronic and widespread smog in the east of the country is attributed to coal burning.

* Official measurements of fine particles in the air measuring less than 2.5 micrometres, which pose the greatest health risk, rose to a record 993 micrograms per cubic metre in Beijing on 12 January 2013, compared with World Health Organization guidelines of no higher than 25.
The State Council expected CNY 2.37 trillion ($380 billion) to be spent on conservation and on emissions cuts in the five years through 2015. In August 2013 it said that China should reduce its carbon emissions by 40-45% by 2020 from 2005 levels, and would aim to boost renewable energy to 15% of its total primary energy consumption by 2020. In 2012 China was the world’s largest source of carbon emissions – 2626 MtC (9.64 Gt CO2), and its increment that year comprised about 70% of world total increase. In March 2014 the Premier said that the government was declaring “war on pollution” and would accelerate closing coal-fired power stations. In November 2014 the Premier announced that China intended about 20% of its primary energy consumption to be from non-fossil fuels by 2030, at which time it intended its peak of CO2 emissions to occur.

The February 2015 edition of the BP Energy Outlook 2035 projects that by 2035 China becomes the world’s largest energy importer, overtaking Europe, as import dependence rises from 15% to 23%. China’s energy production rises by 47% while consumption grows by 60%. China’s fossil fuel output continues to rise with increases in natural gas (+200%) and coal (+19%) more than offsetting declines in oil (-3%). China’s CO2 emissions increase by 37% and by 2035 will account for 30% of world total with per capita emissions surpassing the OECD by 2035.

The distribution of energy resources relative to demand poses some challenges, notably for north-south coal transport and east-west power transmission.

Electricity consumption in 2012 rose only 5.5% to 4.9 trillion kWh, and it was expected to grow between 6.5% and 8.5% in 2013. In 2011 it rose 11.7% to 4693 billion kWh, according to the China Electricity Administration. Its 2010 increase of 14.56% to 4190 billion kWh corresponded with a 10% growth in GDP, according to the China Electricity Council. Some 3090 billion kWh of this (74%) was in industry. 
Nuclear power contributed 2.4% of the total production in 2014 – 123.8 billion kWh according to the IAEA. 
Per capita electricity consumption was 3510 kWh in 2012. By 2030 it is expected to be 5500 kWh/yr and by 2050 about 8500 kWh/yr.
Installed generating capacity at the end of 2012 reached 1145 GWe 19% up in two years. Capacity growth is expected to slow, reaching about 1600 GWe in 2020, and 2000 GWe in 2025. Coal accounted for 59% of the newly-added capacity in 2012.
At the end of 2010, fossil fuelled capacity (mostly coal) reached 707 GWe, hydro capacity was 213 GWe (up 16.6 GWe in the year), nuclear capacity was 10.8 GWe and wind capacity reached 31 GWe. Investment in electricity dropped to CNY 705 billion ($107 billion) for the year. A 2013 report from the NDRC said that China added 15 GWe of wind energy capacity in 2012 and 3 GWe of solar. It endorsed targets to add 21 GWe of hydroelectric capacity, 18 GWe of wind and 10 GWe of solar in 2013. Another 12 GWe of solar PV was added in 2014, making 28 GWe by year end, and a target of 70 GWe for 2017 was announced. A further 100 GWe of wind capacity is expected over 2014-18.
These capacity increase figures were remarkable considering the forced retirement of small inefficient coal-fired plants: 26 GWe of these was closed in 2009 and 11 GWe in 2010, making 71 GWe closed since 2006, cutting annual coal consumption by about 82 million tonnes and annual carbon dioxide emissions by some 165 million tonnes. China is well advanced in developing and deploying supercritical and ultra-supercritical coal plants, as well as moving quickly to design and deploy technologies for integrated (coal) gasification combined cycle (IGCC) plants. Nevertheless it consumed about 4.3 billion tonnes of coal in 2013, more than half the world total, and coal comprised more than 70% of China’s primary energy. By 2020 it is expected to use some 5 billion tonnes of coal annually, while aiming to cut consumption in the northern areas spanning Beijing, Hebei, and Tianjin.
The grid system run by the State Grid Corporation of China (SGCC) and China Southern Power Grid Co (CSG) is sophisticated and rapidly growing, utilising ultra high voltage (1000 kV AC and 800 kV DC) transmission. By 2015 SGCC invested CNY 500 billion ($75.5 billion) to extend the UHV grid to 40,000 km, and in 2015 it plans to spend CNY 420 billion, 24% up on 2014. It expects to commission 46,000 km of AC transmission in 2015, along with UHV lines, and start building 13,000 km of DC lines. SGCC plans to start pre-project work on transmission links with Kazakhstan, Russia, Mongolia and Pakistan in 2015. It is also building a major UHV DC project in Brazil.
By 2020, the capacity of the UHV network is expected to be some 300 GW, which will function as the backbone of the whole system, connecting six regional clusters. By 2020 there will be 400 GWe of clean energy sources connected, of which hydropower will account for 78 GW, and wind power from the north a further significant portion. At present up to half of the wind output is wasted – 2.8 TWh in 2012, because of limited grid connections, according to a China Daily report. At the end of 2009, China had budgeted to spend $600 billion upgrading its grid. Over 2014 to 2020 high-voltage transmission lines are expected to increase from 1.15 million circuit km to 1.6 million circuit km, in line with a big increase in generation capacity (from 1371 to 2073 GWe according to one forecast), and operational transmission losses are expected to be 5.7%, down from 6.6% in 2010.
Among the main listed generators, Huaneng Power produced 203.5 billion kWh from its domestic plants in 2009, 10.2% up on 2008. Datang Power produced 141.9 billion kWh, 12% up on 2008. Huadian Power produced 107.5 billion kWh, 6.75% above 2008. CPI Development produced 43.9 billion kWh, 2.0% above 2008 level. The main nuclear operators are China National Nuclear Corporation (CNNC) and China General Nuclear Power Group (CGN).
Electricity generation is only one part of China's rapid development; roads, air transport and a 16,000 km high-speed rail system (powered by electricity) by 2020 are others. A record 486 km/h rail speed between Beijing and Shanghai was achieved in 2010, and by January 2011, 8358 km of 200 km/hr+ track was operational. By the end of 2011, 13,073 km of such track is expected to be in service after further investment of CNY 700 billion ($106 billion). Also the world's longest bridge – the 42 km Qingdao Haiwan bridge in Shandong province is being built.

Energy policy and clean air

While coal is the main energy source, most reserves are in the north or northwest and present an enormous logistical problem – nearly half the country's rail capacity is used in transporting coal. Because of the heavy reliance on old coal-fired plant, electricity generation accounts for much of the country's air pollution, which is a strong reason to increase nuclear share. China has overtaken the USA as the world's largest contributor of carbon dioxide emissions.* Gas consumption in 2013 was forecast to be 165 billion cubic metres, up 11.9% on 2012. China has shale gas resources, but much of it is in the northwest which is very arid, so water supply is a constraint. By 2035 the US Energy Information Administration expects China’s gas to come equally from conventional, coal bed and shale sources.
* The US Energy Information Administration predicts that China's share in global coal-related emissions will grow by 2.7% per year, from 4.9 billion tonnes in 2006 to 9.3 billion tonnes in 2030, some 52% of the projected world total. Total carbon dioxide emissions in China are projected to grow by 2.8% per year from 6.2 billion tonnes in 2006 to 11.7 billion tonnes in 2030 (or 28% of world total). In comparison, total US carbon dioxide emissions are projected to grow by 0.3% per year, from 5.9 billion tonnes in 2006 to 7.7 billion tonnes in 2030.3
Water is also a constraint on coal-fired power generation, much of which is in water-deficient regions. Retrofit to air cooling decreases efficiency by 3-10% and is reported to cost about $200 million per GWe in China.
China's energy consumption per unit of gross domestic product met a target reduction of 20% from 2005 levels by the end of 2010, according to the National Development and Reform Commission (NDRC). 
In March 2013 the NDRC announced new plans for seawater desalination.* China aims to produce 2.2 million m3/day of desal water by 2015, more than three times the 2011 level. More than half of the freshwater channelled to islands and more than 15% of water delivered to coastal factories will come from the sea by 2015, according to the plan.
* The list includes the cities of Shenzhen and Zhoushan, Luxixiang Island in Zhejiang Province, Binhai New Area in Tianjin, Bohai New Area in Hebei, and several industrial parks and companies. The NDRC has asked the listed regions and companies to actively promote the application of desalted water and encourage its use in daily supplies. The cost is likely to be some CNY 21 billion ($3.35 billion).
A white paper on Energy Policy was released by the State Council on 24 October 2012. This included raising the proportion of clean, low-carbon fossil energy and non-fossil energy in the energy mix, and promoting the efficient and clean utilization of coal. It aims to increase the shares of non-fossil fuels in primary energy consumption. "China will invest more in nuclear power technological innovations, promote application of advanced technology, improve the equipment level, and attach great importance to personnel training. China's installed capacity of nuclear power is expected to reach 40 GWe by 2015." The installed generating capacity of wind power is expected to reach 100 GWe by the end of 2015, and that of solar energy is expected to exceed 21 GWe by then, with a total solar heat collection area of 400 million square metres.
In September 2014 a national climate change plan prepared by NDRC was approved by the State Council. This set emission and clean energy targets for 2020. The carbon emission intensity target is 40-45% reduction from 2005 to 2020, with good progress of almost 29% by the end of 2013. It aims to increase the shares of non-fossil fuels in primary energy consumption to about 15% by 2020 – at the end of 2013 it was 9.8%. The plan also sets the target for China to increase forest coverage by 40 million hectares within the next five years to 2019. The government said it would speed up efforts to establish a carbon emission permit market, as well as deepening international cooperation under the principles of "common but differentiated responsibilities," equity, and respective capability. UN emission reduction targets after 2020 are likely to be addressed in the 13th Five-Year Plan about 2016.
The State Council published the Energy Development Strategy Action Plan, 2014-2020 in November 2014. The plan aims to cut China's reliance on coal and promote the use of clean energy, confirming the 2012 target of 58 GWe nuclear in 2020, with 30 GWe more under construction. The plan calls for the "timely launch" of new nuclear power projects on the east coast and for feasibility studies for the construction of inland plants. It says that efforts should be focused on promoting the use of large pressurized water reactors (including the AP1000 and CAP1400 designs), high temperature gas-cooled reactors (HTRs) and fast reactors. It also says that research should be conducted to "improve the nuclear fuel cycle system” including reprocessing of used fuel.

More broadly, the share of non-fossil fuels in the total primary energy mix should increase from 9.8% in 2013 to 15% in 2020, while coal’s share shrinks from 67% to 62%, according to the plan. Installed generating capacity of hydro, wind and solar power is expected to reach 350 GWe, 200 GWe and 100 GWe, respectively, by 2020.
In June 2015 China submitted its Intended Nationally Determined Contribution (INDC) to climate change mitigation and adaptation for 2020 to 2030 to the UN. This pledge included increasing the share of non-fossil fuels in primary energy consumption to about 20% and restraining carbon emissions in 2030 to double of those in 2005 (after being 158% of the 2005 level in 2015 and 182% in 2020). Annual average new nuclear capacity 2005 to 2020 is 3.4 GWe/yr, from 2020 to 2030 it is 9.0 GWe/yr.

Nuclear power

Nuclear power has an important role, especially in the coastal areas remote from the coalfields and where the economy is developing rapidly. Generally, nuclear plants can be built close to centres of demand, whereas suitable wind and hydro sites are remote from demand. Moves to build nuclear power commenced in 1970 and about 2005 the industry moved into a rapid development phase. Technology has been drawn from France, Canada and Russia, with local development based largely on the French element. The latest technology acquisition has been from the USA (via Westinghouse, owned by Japan's Toshiba) and France. The State Nuclear Power Technology Corporation (SNPTC) has made the Westinghouse AP1000 the main basis of technology development in the immediate future, particularly evident in the local development of CAP1400 based on it.
This has led to a determined policy of exporting nuclear technology, based on China’s development of the CAP1400 reactor with Chinese intellectual property rights and backed by full fuel cycle capability. The policy is being pursued at a high level politically, as one of 16 key national science & technology projects, utilising China's economic and diplomatic influence, and led by the initiative of CGN commercially, with SNPTC and most recently CNNC in support.
By around 2040, PWRs are expected to level off at 200 GWe and fast reactors progressively increase from 2020 to at least 200 GWe by 2050 and 1400 GWe by 2100.
Prior to 2008, the government had planned to increase nuclear generating capacity to 40 GWe by 2020 (out of a total 1000 GWe planned), with a further 18 GWe nuclear being under construction then. However, projections for nuclear power then increased to 70-80 GWe by 2020, 200 GWe by 2030 and 400-500 GWe by 2050. Following the Fukushima accident and consequent pause in approvals for new plants, the target adopted by the State Council in October 2012 became 60 GWe by 2020, with 30 GWe under construction. In 2015 the target for nuclear capacity on line in 2030 was 150 GWe, providing almost 10% of electricity, and 240 GWe in 2050 providing 15%. However the post-Fukushima slowdown may mean that the 2030 figure is only about 120 GWe.
National policy has moved from ‘moderate development’ of nuclear power to ‘positive development’ in 2004, and in 2011-12 to ‘steady development with safety’. See further comment under Post-Fukushima Review below. Then in 2014 the NEA announced that it was aiming for world leadership in nuclear technology, with detailed plans to come in April 2015. The precise direction and priorities of such plans are likely to be strongly contested among the likely players, notably CNNC, CGN and SNPTC (now SNPI).
In December 2011 the National Energy Administration (NEA) said that China will make nuclear energy the foundation of its power-generation system in the next "10 to 20 years", adding as much as 300 GWe of nuclear capacity over that period. Two weeks earlier the NDRC vice-director said that China would not swerve from its goal of greater reliance on nuclear power. In September 2013 SNPTC estimated that 4-6 new units per year would be needed to 2015 then 6-8 units during the 13th Five-Year Plan Period (2016-2020), increasing to 10 units each year after 2020. In December 2014 the NEA said that China could manufacture eight full sets of reactor equipment per year.
In September 2010, the China Daily reported that China National Nuclear Corporation (CNNC) alone planned to invest CNY 800 billion ($120 billion) into nuclear energy projects by 2020.  In order to fund the company's expansion target, CNNC planned to list its subsidiary, CNNC Nuclear Power Co Ltd in 2011, to attract strategic investors, but this apparently did not occur.
In July 2013 the NDRC set a wholesale power price of CNY 0.43 per kWh (7 US cents/kWh) for all new nuclear power projects, to promote the healthy development of nuclear power and guide investment into the sector. The price is to be kept relatively stable but will be adjusted with technology advances and market factors, though many consider it not high enough to be profitable. It is reported that the price for power from Sanmen may in fact be about 5% higher. Nuclear power is already competitive, and wholesale price to grid has been less than power form coal plants with flue gas desulfurization, though the basic coal-fired cost is put at CNY 0.3/kWh*. In March 2015 a new round of electricity market reform was launched, which allowed nuclear power companies to negotiate prices with customers. This is expected to help get inland projects moving ahead.
* Wind cost to grid is CNY 0.49 - 0.61 per kWh, depending on region, solar is CNY 0.9 (desert) to 1.3 (east).

Hong Kong supply

Hong Kong gets much of its power from mainland China, in particular about 70% of the output from Daya Bay's 1888 MWe net nuclear capacity is sent there. A 2014 agreement increases this to 80%. The Hong Kong government plans to close down its coal-fired plants, and by 2020 to get 50% of its power from mainland nuclear (now 23%), 40% from gas locally (now 22%) and 3% from renewables. Another option, with less import dependence, is to increase domestic generation from gas to 60%, and maintain mainland nuclear at 20%.
Hong Kong utility China Light & Power has equity in CGN's Daya Bay (25%) power plant, is negotiating concerning a possible 17% share in Yangjiang, and may take equity in a further CGN nuclear plant. Since 1994 it has been getting up to one-third of its power from Daya Bay output, and this contract now runs to 2034. According to CLP data, nuclear power cost HK 47 c/kWh in November 2013, compared with 27 cents for coal and 68 cents for gas, which provides the main opportunity to increase supply.

Regulation and safety – general

The National Nuclear Safety Administration (NNSA) under the China Atomic Energy Authority (CAEA) was set up in 1984 and is the licensing and regulatory body which also maintains international agreements regarding safety. It reports to the State Council directly, but is perceived to be insufficiently independent of the CAEA, which plans new capacity and approves feasibility studies for new plants (see also SCRO report below). In relation to the AP1000, NNSA works closely with the US Nuclear Regulatory Commission.
NNSA is responsible for licensing all nuclear reactors and other facilities, safety inspections and reviews of them, operational regulations, licensing transport of nuclear materials, waste management, and radiation protection including sources and NORM. It licenses staff of nuclear manufacturers through to reactor operators. It is responsible for environment impact assessment of nuclear projects. The 2003 Law on Prevention and Control of Radioactive Pollution passed by Congress is supplemented by a number of Regulations issued over 1986 to 2011 with the authority of State Council.
Nuclear power plant licences issued by NNSA progress from siting approval, then construction permit (12 months before first concrete), fuel loading permit, to operation licence.
China has shown unprecedented eagerness to achieve world's best standards in nuclear safety (as also in civil aviation). It has requested and hosted 12 Operational Safety Review Team (OSART) missions from IAEA teams to October 2011, and each plant generally has one external safety review each year, either OSART, WANO peer review, or CNEA peer review (with the Research Institute for Nuclear Power Operations, RINPO). In December 2013 the NNSA with its Japanese and South Korean counterparts agreed to form a network to cooperate on nuclear safety and quickly exchange information in nuclear emergencies. NNSA is also part of the ASEAN+3 Forum on Nuclear Safety.
In 2013 the CAEA signed a cooperation agreement with the OECD’s Nuclear Energy Agency (NEA), confirming China as a ‘key partner’ with OECD.
Following the Fukushima accident in Japan in March 2011, the government suspended its approval process pending a review of lessons which might be learned from it, particularly regarding siting of reactors with plant layout, and control of radiation release. Safety checks of operating plants were undertaken immediately, and review of those under construction was completed in October 2011. Resumption of approvals for further new plants was suspended until a new nuclear safety plan was accepted and State Council approval given in October 2012 (see also Post-Fukushima review below).
Following the Fukushima accident, concern regarding possible river pollution and depletion during droughts (due to evaporative cooling towers) meant delays until at lest 2015 to the inland AP1000 plants which were due to start construction in 2011.

SCRO report on nuclear investment and safety

In January 2011 a report from the State Council Research Office (SCRO), which makes independent policy recommendations to the State Council on strategic matters, was published. While approving the enormous progress made on many fronts, it cautioned concerning provincial and corporate enthusiasm for new nuclear power plants and said that the 2020 target should be restricted to 70 GWe of new plant actually operating so as to avoid placing undue demand on quality control issues in the supply chain. Another 30 GWe could be under construction. It emphasised that the priority needed to be resolutely on Generation-III technology, notably the AP1000 and derivatives. However, ambitious targets to deploy AP1000s with reduced foreign input had proved difficult, and as a result, more of the Generation-II CPR-1000 units are under construction or on order. Only China is building Gen-II units today in such large numbers, with 57 (53.14 GWe) on the books4.
SCRO said that reactors built today should operate for 50 or 60 years, meaning a large fleet of Gen-II units will still be in operation into the 2070s, when even Gen-III reactors would have given way to Generation-IV and perhaps even to commercial nuclear fusion. The country should be 'careful' concerning 'the volume of second generation units under construction... the scale should not be too large' to avoid any perception of being below international standards of safety in future, when most of the world's Gen-II reactors are retired. The SCRO noted the 100-fold increase in probabilistic safety brought by Gen-III, and that future generations would continue the trend.
Another factor potentially affecting safety is the nuclear power workforce. While staff can be technically trained in four to eight years, 'safety culture takes longer' at the operational level. This issue is magnified in the regulatory regime, where salaries are lower than in industry, and workforce numbers remain relatively low. SCRO said that most countries employ 30-40 regulatory staff per reactor in their fleet, but the National Nuclear Safety Administration (NNSA) has only 1000 staff – a figure that must more than quadruple by 2020. The SCRO recommended that 'The NNSA should be an entity directly under the State Council Bureau, making it an independent regulatory body with authority.' It is currently under the China Atomic Energy Authority, although it is understood to report to the State Council directly
The report said that 32 further reactors 34.86 GWe had been approved by the state at end 2010, with 25 (27.73 GWe) then under construction.
The SCRO calculated that nuclear development would require new investment of some CNY 1 trillion ($151 billion) by 2020, not counting those units being built now. These projects rely mainly on debt, funds are tight, and 'investment risks cannot be discounted'. This cost figure could rise if supply chain issues impact schedules, with repercussions for companies borrowing to build and for the economics of the Chinese nuclear program overall. A major recommendation was to sort out bottlenecks in the supply chain for AP1000 reactors.

Post-Fukushima review

Following the Fukushima accident in March 2011, the State Council, announced on March 16 that it would suspend approvals for new nuclear power stations and conduct comprehensive safety checks of all nuclear projects, including those under construction (with an immediate halt required on any not satisfactory). It also suspended work on four approved units due to start construction in 2011*. About 34 reactors were already approved by the central government of which 26 were being built. The Shidaowan HTR, though ready for first concrete, was also delayed. After three months the inspections of operating plants had been completed, and those on plants under construction were completed by October (though construction had continued).
* Fuqing 4, 5 & 6, Yangjiang 4. Fuqing 4 and Yangjiang 4 started construction late in 2012
In May 2012 a new safety plan for nuclear power was approved in principle. The State Council considered a report on civil nuclear facilities including changes made since the Fukushima accident, and affirmed that the fundamental principle of China’s nuclear safety and radioactive pollution prevention is to put safety and quality first. It is now explicit that Chinese regulations are to fully incorporate the safety standards of the International Atomic Energy Agency (IAEA). In an unprecedented move to improve the transparency of nuclear regulation the government then formally solicited public comments on its nuclear safety plan which must ensure that no ‘serious incident’ (INES Level 3) or greater occurs at any reactor. So far in China no nuclear incident has been over INES level 2. The plan involves significant expenditure across all of the country’s facilities.
On 24 October 2012 the premier outlined a modified approach to nuclear power construction at a State Council meeting, signaling that approvals for new plants could recommence. Construction of 25 reactors had continued following March 2011, and several are now on line. He said that nuclear power development would continue at a steady pace, with safety paramount so that that new reactors will have to comply with new-generation safety standards, and plans for inland plants would be put on hold until 2015. The nuclear capacity target for 2020 became 58 GWe in operation and 30 GWe under construction. Over 2013-15, 13 GWe was to be added, and over 2016-20, 30 GWe more. Review of these figures in May 2015 suggests that the 58 GWe might take until 2021, with 30-35 GWe under construction then.
State Council approved the "12th 5-year Plan for Nuclear Safety and Radioactive Pollution Prevention and Vision for 2020", compiled by the Ministry of Environment. It suggested that China will need to spend RMB 80 billion ($13 billion) on improving nuclear safety at 41 operating and under construction reactors over the next three years to 2015. "China has multiple types of nuclear reactors, multiple technologies and multiple standards of safety, which makes them hard to manage," it said, adding that the operation and construction of nuclear reactors must improve. The chairman of CNNC commented that it was not technology or finance now holding back the sector in China, but the need to gain public acceptance, especially for inland projects. Nevertheless, "the pace of approvals will certainly be slower but the overall direction cannot be changed," he said. Further details followed the 18th National Congress in 2012.
The bottom line of safety requirements is that radioactive releases should never cause “unacceptable effects on the environment or the public”, and that advanced nuclear technology should “practically eliminate the possibility of release of significant quantities of radioactive substances from nuclear power units” built from 2016.
A series of research and development (R&D) projects was launched by the NEA in February 2012 to improve safety-related technology and the country’s emergency response capabilities at indigenous nuclear power plants in the event of an extreme disaster beyond design basis. The 13 R&D projects were conducted by CNNC, CGN and the Institute of Nuclear and New Energy Technology (INET) at Tsinghua University. They include the development of passive emergency power supply and cooling water systems, development of passive containment heat removal systems, developing hydrogen control devices, measures for the prevention and mitigation of used fuel accidents, and analysing the impact of multiple simultaneous external events and response measures. Other projects studied the monitoring and treatment of contaminated ground and water. All were expected to be complete in 2013. Referring particularly to the CPR-1000 reactors being widely built in China, the National Energy Administration (NEA) said that "Implementing the measures will comprehensively enhance safety of Generation II+ nuclear power technology in our country, and significantly reduce the core damage frequency and large early release frequency" to "internationally recognized levels" required for Generation III reactors. The outcome of this is the ACC1000 reactor design described below.
In July 2010 a 22-strong IAEA team from 15 countries carried out a two-week Integrated Regulatory Review Service mission to review of China's regulatory framework for nuclear safety. The IAEA made a number of recommendations but said that the review had provided "confidence in the effectiveness of the Chinese safety regulatory system and the future safety of the vast expanding nuclear industry."
In 2014, the five major nuclear power utilities including CNNC and CGN signed the Cooperation Framework Agreement on Mutual Aid for Nuclear Accident Emergency Among Groups, undertaking to establish and improve the emergency response mechanism and cooperation between adjoining nuclear power plants belonging to different groups, in case of a serious nuclear accident.

Sites of Nuclear Power Plants in China
Sites of Nuclear Power Plants in China

Reactor technology

China has set the following points as key elements of its nuclear energy policy:
  • PWRs will be the mainstream but not sole reactor type.
  • Nuclear fuel assemblies are fabricated and supplied indigenously.
  • Domestic manufacturing of plant and equipment will be maximised, with self-reliance in design and project management.
  • International cooperation is nevertheless encouraged.
The technology base for future reactors remains officially undefined, though two designs are currently predominant in construction plans: CPR-1000 and AP1000, though plans for the former have been scaled back post-Fukushima. Beyond them, high-temperature gas-cooled reactors and fast reactors appear to be the main priorities.
A major struggle between the established China National Nuclear Corporation (CNNC) pushing for indigenous technology and the small but well-connected State Nuclear Power Technology Corp (SNPTC) favouring imported technology was won by SNPTC about 2004. In particular, SNPTC proposed use of indigenized 1000+ MWe plants with advanced third-generation technology, arising from Westinghouse AP1000 designs at Sanmen and Haiyang (see section below on Embarking upon Generation III plants). Westinghouse has agreed to transfer technology to SNPTC over the first four AP1000 units so that SNPTC can build the following ones on its own. In 2014 SNPTC signed a further agreement with Westinghouse to deepen cooperation in relation to AP1000 and CAP1400 technology globally and “establish a mutually beneficial and complementary partnership”.
In February 2006, the State Council announced that the large advanced PWR was one of two high priority projects for the next 15 years, depending on "Sino-foreign cooperation, in order to master international advanced technology on nuclear power and develop a Chinese third-generation large PWR".5 In September 2006, the head of the China Atomic Energy Authority said that he expected large numbers of third-generation PWR reactors derived from foreign technology to be built from about 2016, after experience is gained with the initial AP1000 units.
This trend was given impetus by the reappraisal of safety following the Fukushima accident.

EPR

Two Areva EPR reactors are being built at Taishan, and two more are planned. (see section below on Embarking upon Generation III plants.) Areva says the reactors are 4590 MWt, with net power 1660 MWe.
In October 2008, Areva and CGN (then: CGNPC) announced establishment of an engineering joint venture as a technology transfer vehicle for development of the EPR and possibly other PWR plants in China and later abroad. The Wecan JV, 55% CGN subsidiary China Nuclear Power Engineering Co. and 45% Areva, was set up in December 2009 and based in Shenzhen, though by mid-2011 the CGN share was held by China Nuclear Power Technology Research Institute (CNPRI), another subsidiary. Overseas projects involving CGN appear now to hold the only potential for expanding the role of Areva’s EPR technology involving China.

AP1000, CAP1000

The Westinghouse AP1000 is the main basis of China's move to Generation III technology, and involves a major technology transfer agreement. It is a 1250 MWe gross reactor with two coolant loops. The first four AP1000 reactors are being built at Sanmen and Haiyang, for CNNC and China Power Investment Corp (CPI) respectively. Six more at three sites are firmly planned after them, at Sanmen, Haiyang and Lufeng (for CGN), and at least 30 more are proposed to follow. A State Council Research Office report in January 2011 emphasised that these should have priority over alternative designs such as CPR-1000, and this position strengthened following the Fukushima accident.
The reactors are built from modules fabricated adjacent to each site. The timeline is 50 months from first concrete to fuel loading, then six months to grid connection for the first four units, with this expected to reduce significantly for the following units. In October 2009, SNPTC and CNNC signed an agreement to co-develop and refine the AP1000 design, and this position strengthened following the Fukushima accident. (See also section below on Embarking upon Generation III plants).
CNEA estimated in May 2013 that the construction cost for two AP1000 units at Sanmen are CNY 40.1 billion ($6.54 billion), or 16,000 Yuan/kW installed ($2615/kW), instead of CNY 32.4 billion earlier estimated. This is about 14% higher than the latest estimate for the CPR-1000, but likely to drop to about CNY 13,000/kW ($2120/kW) with series construction and localisation as envisaged. Grid purchase price is expected to exceed CNY 0.45/kWh at present costs, and drop to the standard CNY 0.43/kWh with series build and reduced capital cost.
SNPTC also refers to a CAP1000, which is a local standardization of the design, transitional to CAP1400. It is said to have reduced cost and improved operation and maintenance attributes. The base design, commenced in 2008, is complete, the detailed design, started in April 2010, was due by June 2013. Early in 2012 SNPTC had organized SNERDI (nuclear island and general designer) and SNPDRI (for conventional island) to localize the design for both inland and coastal sites, for Xianning, Pengze and Taohuajiang.
Alstom has an agreement with Dongfang Electric Corporation for turbine and generator packages for future AP1000 projects to be based on Alstom’s Arabelle technology. Alstom and DEC have supplied more than half of the turbine generator sets for Chines nuclear power plants to 2013.

CAP1400

Westinghouse announced in 2008 that it was working with SNPTC and Shanghai Nuclear Engineering Research & Design Institute (SNERDI) to develop jointly a passively safe 1400-1500 MWe design from the AP1000/CAP1000, for large-scale deployment. SNPTC initially called it the Large Advanced Passive PWR Nuclear Power Plant (LPP or APWR). It is one of 16 Key National Projects in China. This development with SNERDI opens the possibility of China itself exporting the new larger units with Westinghouse's cooperation.
In December 2009, the State Nuclear Plant Demonstration Company – a 55-45% joint venture company by SNPTC and China Huaneng Group – was set up to build and operate an initial demonstration unit of the larger two-loop design, the CAP1400, at Huaneng's Shidaowan site. The new company signed a set of agreements with SNERDI and the State Nuclear Power Engineering Company (SNPEC) in November 2010 to proceed with the project. Basic design of the 4040 MWt (ca.1500 MWe gross) reactor was completed in 2012, major components are ordered and being manufactured. It will have 193 fuel assemblies, MOX capability, 50 GWd/t burn-up and improved steam generators. Seismic rating is 300 gal. Dongfang Electric is to design and build the turbine generator under contract to SNPTC. The basic design was approved by the National Energy Administration (NEA) in January 2014. Site works were complete in April 2014, with final NNSA approvals in September, following a 17-month review. In December 2014 SNPTC said it was ready to pour first concrete but awaited State Council permission, then in April 2015 construction of the turbine hall started. Westinghouse is providing technical consulting services to SNPTC for the design. More than 80% of the components will be indigenous, and contracts for 21 of 29 long lead time components had been signed by February 2015.
CNNC and SNPTC have talked of export potential, and SNPTC said that “exploration of the global market” for the CAP1400 would start in 2013, particularly in South America and Asia. In mid-2013 SNPTC quoted approx. $3000/kW capital cost and 7 c/kWh.
CAP1400 may be followed by a larger, 3-loop CAP1700 design if the passive cooling system can be scaled to that level. Agreements with Westinghouse stipulate that SNPTC will own the intellectual property rights for any derivatives over 1350 MWe. SNPEC is doing the engineering under a team from SNERDI, the Shandong Electric Power Engineering Consulting Institute (SEPECI), and the State Nuclear Power Equipment Manufacturing Company (SNPEMC), which will make the components.

CNP-1000, also CNP-600, CNP-300 (ACP 300, ACP600, ACP1000)

CNNC had been working with Westinghouse and Framatome (now Areva) at SNERDI since the early 1990s to develop a Chinese standard three-loop PWR design, the CNP-1000. This is developed from the two-loop Qinshan CNP-300 unit (scaled up to the two-loop CNP-600 units, also at Qinshan), with high (60 GWd/t) burn-up, 18-month refueling cycle and 20 more (but shorter) fuel assemblies than the French-origin M310 units at Daya Bay and Ling Ao.b In 1997, the Nuclear Power Institute of China (NPIC) at Chengdu became involved in the reactor design and, early in 2007, SNERDI was reassigned to concentrate on the AP1000 programme.
CNNC has been keen to create its own brand of advanced second-generation reactor with full intellectual property rights, and wanted to build two initial CNP-1000 plants at Fangjiashan, adjacent to Qinshan near Shanghai, under the 11th Economic Plan, though the design probably would not have been ready. In early 2007, the CNP-1000 development was put on hold, though this aborted export plans then for two CNP-1000 units to Pakistan.
Further CNP-600 units are being built at Qinshan and Changjiang, Hainan. CNNC says they are free of French intellectual property rights. CNNC is also developing the design to the ACP600 which it calls a third-generation design and expected to be built on Hainan or in the northwest Gansu province and exported.c It will have double containment, 18-24 month refueling cycle, 121 fuel assemblies (as CNP-600), digital I&C, and 60-year plant life, but slightly less power – 605 MWe instead of 650 MWe gross.
In October 2011 CNNC announced that its independently-developed ACP1000 was entering the engineering design stage, initially for Fuqing units 5&6, with 1100 MWe nominal power and load-following capability. It has 177 fuel assemblies 3.66 m long. In May 2013 CNNC finished a preliminary safety analysis report, and was working on construction design in order to be ready for construction by the end of the year. CNNC expected to start building the first in 2014, at Fuqing, with 85% local content, and the second there in 2015. In April 2013 it announced an export agreement for an ACP1000, for Pakistan. CNNC asserts full intellectual property rights for the CNP series of reactors, which have evolved to the ACP series. However, when the National Energy Administration ordered a rationalization of CNNC’s and CGN’s 1000 MWe class designs, the ACP1000 morphed into the Hualong One (see description below) – though CNNC still describes its version of this as ACP1000. Meanwhile the IAEA approved the ACP1000 design in its Generic Reactor Safety Review process in December 2014, though the IAEA points out that this does not “constitute any kind of design certification”.
Two new 300 MWe CNP-300 PWR units are being built at Chasma in Pakistan by the China Zhongyuan Engineering Corporation. They are similar to those already commissioned in 2000 and 2011, and similar to Qinshan 1 – China's first indigenously-designed (by SNERDI) nuclear power plant.
CNNC was seeking to sell the CNP-300 to Belarus and in Africa, and these will probably now become ACP300. 

ACP100 small modular PWR

A ‘key project’ on the 12th Five-Year Plan is CNNC’s multi-purpose small modular reactor, the ACP100. Preliminary design was completed in 2014 ready for construction start in 2015 and operation in 2017, but it awaits NDRC approval. The design is based on the larger ACP (and CNP) units, or AP1000, has passive safety features and will be installed underground. Seismic tolerance is 300 Gal. It has 57 fuel assemblies 2.15m tall and integral steam generators (287ºC), so that the whole steam supply system is produced and shipped a single reactor module. It has passive cooling for decay heat removal. Its 310 MWt produces about 100 MWe, and power plants comprising two to six of these are envisaged, with 60-year design life and 24-month refueling. Or each module can supply 1000 GJ/hr, giving 12,000 m3/day desalination (with MED). Industrial and district heat uses are also envisaged, as is floating nuclear power plant (FNPP) application. Capacity up to 150 MWe is envisaged.
CNNC New Energy Corporation (CNNC-CNEC), a joint venture of CNNC (51%) and China Guodian Corp, is planning to build two ACP100 units in Putian county, Zhangzhou city, at the south of Fujian province, near Xiamen and not far from Fuqing, as a demonstration plant. This will be the CNY 5 billion ($788 million) phase 1 of a larger project. Construction time is expected to be 36-40 months, starting 2015 for the two Putian units. CNNC has applied for NDRC approval. A second proposal was approved for two further CNNC-CNEC units at Zhangzhou-Gulei, but this is suspended by local government opposition. In April 2015 CNNC requested a review of the design by IAEA in its Generic Reactor Safety Review process, expected to take seven months from July.
The project involves a joint venture of three companies for the pilot plant: CNNC as owner and operator, the Nuclear Power Institute of China (NPIC) as the reactor designer and China Nuclear Engineering Group being responsible for plant construction. CNNC-CNEC signed a second ACP100 agreement with Hengfeng county, Shangrao city in Jiangxi province, and a third with Ningdu county, Ganzhou city in Jiangxi province in July 2013 for another ACP100 project costing CNY 16 billion. Further inland units are planned in Hunan and Jilin provinces, and CNNC has signed ACP100 development agreements also with Zhejiang and Heilongjiang provinces. Export potential is considered high, with full intellectual property rights. CNNC-CNEC will construct major parts of the reactors in Bashan, Jilin province.

CAP150 Small modular PWR

This is an integral PWR, with SNPTC provenance, being developed from the CAP1000 in parallel with CAP1400 by SNERDI, using proven fuel and core design. It is 450 MWt/ 150 MWe and has 8 integral steam generators (295°C), and claims “a more simplified system and more safety than current third generation reactors”. It is pitched for remote electricity supply and district heating, with three-year refueling and design life of 80 years. It has both active and passive cooling and in an accident scenario, no operator intervention required for seven days. Seismic design basis 300 Gal. In mid 2013 SNPTC quoted approx. $5000/kW capital cost and 9 c/kWh, so significantly more than the CAP1400.

CAP-FNPP

Another SNERDI project is a reactor for floating nuclear power plant (FNPP). This is to be 200 MWt and relatively low-temperature (250°C), so only about 40 MWe with two external steam generators and five-year refueling. See also entry below re Russian FNPP agreement.

CPR-1000, M310+, ACPR1000

The CPR-1000 is a significantly upgraded version of the 900 MWe-class French M310 three-loop technology imported for the Daya Bay nuclear power plant in the 1980s and also built at Ling Ao. Known as the 'improved Chinese PWR' and designated Generation II+, it features digital instrumentation and control and a design life of 60 years. Its 157 fuel assemblies (4.3 m long) have calculated core melt frequency of 1x10-5 and a release probability an order of magnitude lower than this.
Standard construction time is 52 months, and the claimed unit cost was under CNY 10,000 (US$ 1600) per kilowatt, though 2013 estimates put it at about $2300/kW domestically. With a capacity of 1080 MWe gross (1037 MWe net), Ling Ao Phase II is the first plant to be designated as the CPR-1000 design. The CPR-1000 was being widely and quickly deployed for domestic use, with 57 likely to be built, as of end of 2010. Following the Fukushima accident, numbers will be much lower, and there will be no further approvals. Six were operating by September 2014, with 16 under construction. Tianwan 5&6 may be the last ones built.
China Guangdong Nuclear Power Corporation (CGN) led the development of the CPR-1000 and established a nearly complete domestic supply chain. However, Areva retains intellectual property rights, which constrains overseas sales since the Chinese would need agreement from Areva on a case-by-case basis. The six CNNC-built units (Fuqing and Fangjiashan) are often designated M310+.
CGN refers to later units as CPR-1000+, incorporating design improvements which bring it close to Generation III standard. The first of these are Yangjiang 3&4, with some design modifications, followed by units 5&6 which are more fully transitional to ACPR1000 and are being called that.
Of more significance was its evolution to the Advanced CPRACPR1000 – with full Chinese intellectual property rights, launched by CGNPC in November 2011 with some fanfare regarding its safety attributes, which comply with international requirements. CGN has been in cooperation with Dongfang Electric, Shanghai Electric, Harbin Electric, China First Heavy Industries, China Erzhong and other companies since 2009 to develop the ACPR1000, a three-loop unit with double containment and core-catcher. 
CGN made it available for local build on schedule from 2013 with the first at Yangjiang, units 5&6, to be followed by Hongyanhe 5&6 and Lufeng 1&2 (now to be AP1000). In September 2012 Fangchenggang 3&4 was identified as the demonstration project, with construction start at the end of 2014, but meanwhile construction started on Yangjiang 5&6, which CGN said had evolved to be an ACPR1000 design. Fangchenggang 3 was to be the reference plant for CGN’s bid to build the Sinop plant in Turkey. Overnight construction cost is expected to be $2500/kW.
A further development, ACPR1000+, was envisaged for export, from 2014, but was abandoned with the rationalisation to Hualong One described below, CGN's version of which is HL1000. It was to have a 60-year life and 300 Gal seismic capability. The conceptual design gained IAEA approval through its Generic Reactor Safety Review process in May 2013, though the IAEA points out that this does not “constitute any kind of design certification”.
In January 2012, CGN with Areva and EdF agreed on a partnership to develop a Generation III reactor based on the CPR-1000, the ACE1000 (Areva-CGN-EdF1000). Mitsubishi Heavy Industries, already designing the similar-size Atmea1 with Areva, said it will not be involved. The ACE1000 concept is reported to be evolutionary, with single but reinforced containment, active safety systems with three 100% loops (so can do maintenance on one of them outside outages). No more has been heard of this plan and it has evidently been overtaken by Hualong One.

ACPR small modular PWRs

Not to be outdone by CNNC in the small modular field, CGN has two small ACPR designs: an ACPR100 and an ACPR50S, both with passive cooling for decay heat and 60-year design life. Both have standard type fuel assemblies and fuel enriched to <5% with burnable poison giving 30 month refueling. The ACPR100 is an integral PWR, 450 MWt, 140 MWe, having 69 fuel assemblies. Reactor pressure vessel is 17m high and 4.4 m inside diameter, operating at 310°C. It is designed as a module in larger plant and would be installed underground. 
The offshore ACPR50S is 200 MWt, 60 MWe with 37 fuel assemblies and two loops feeding four external steam generators. Reactor pressure vessel is 7.4m high and 2.5 m inside diameter, operating at 310°C. It is designed for mounting on a barge as floating nuclear power plant (FNPP) or possible submersible. The applications for these are similar to those for the ACP100, but the timescale is longer and none is expected on line before 2023.

Hualong One – rationalisation of ACP1000 and ACPR1000+

Since 2011 several rounds of negotiations between CNNC and CGN have grappled with the task of "merging" the two designs as ordered by the National Energy Administration (NEA) while allowing for some differences, with impetus given by the regulator. Both are three-loop designs based to some extent on the French M310, but the cores are very different: one (ACP1000) has 177 fuel assemblies 3.66m long, the ACPR1000 has 157 assemblies 4.3 m long, so physically merging the basic designs was impractical, and in the event the ACP1000 design prevailed, though it was less mature. Some features of the ACPR1000 are incorporated, at least in the CGN version, which it calls HL1000.
The Hualong One thus has 177 fuel assemblies 3.66 m long, 18-24 month refuelling interval, equilibrium fuel load will be 72 assemblies with 4.45% enriched fuel. It has three coolant loops delivering 3150 MWt, 1150 MWe, double containment and active safety systems with some passive elements, and a 60-year design life. Average burn-up is 45,000 MWd/tU. Seismic tolerance is 300 Gal. Instrumentation and control systems will be from Areva-Siemens, but overall 90% will be indigenous components. Target cost in China is $2800-3000/kWe, though recent estimates mention $3500/kW. The CNNC and CGN versions will be very similar but not identical, they will have slightly different safety systems and each organisation will maintain much of its own supply chain. The new design has been variously called Hualong 1000 or HL1000 by CGN, ACP1000 by CNNC, and generically Hualong One, or HPR1000 – Hualong Pressurised Reactor.
The first units will be Fangchenggang 3&4 (CGN) and Fuqing 5&6 (CNNC). The 'rationalisation' was helped by greater commonality in ownership of the two companies as set out in September 2012 though still not implemented a year later. Fuqing 5 started construction in May 2015.

CGNPC Progressive Localisation of CPR-1000

VVER

Russia's Atomstroyexport was general contractor and equipment provider for the Tianwan 1&2 AES-91 power plants using the V-428 version of the well-proven VVER-1000 reactor of 1060 MWe capacity. The reactors incorporate Finnish safety features and Siemens-Areva instrumentation and control (I&C) systems. Russia's Energoatom is responsible for maintenance from 2009. Tianwan units 3&4 will use the same version of the VVER-1000 reactor with Areva I&C systems.
In 2013 Atomergoproekt said it was promoting the VVER-TOI to CNNC and engineering companies.

Russian Floating Nuclear Power Plants

In May 2014 the China Atomic Energy Authority (CAEA) signed an agreement with Rosatom to cooperate in construction of floating nuclear cogeneration plants (FNPP) for China offshore islands. These would be built in China but be based on Russian technology, and possibly using Russian KLT-40S reactors – Russia’s TVEL anticipates providing fuel for them. In July 2014 Rusatom Overseas signed a further agreement, this time with CNNC New Energy, for the joint development of FNPPs – both barge-mounted and self-propelled – from 2019.

Candu

From 1998 Atomic Energy of Canada Ltd (AECL) built the two-unit Qinshan Phase III plant on schedule and under budget and estimates that it could be replicated for 25% lower cost. Any replication would be on the basis of involving local engineering teams, not on a turnkey basis, but the technology is now well understood and the decades-old Candu-6 design would likely pose fewer problems for technology transfer than state-of-the-art third-generation designs from Westinghouse and Areva. (The Candu-6 units at Wolsong 2-4 in Korea had substantial local content, reaching 75% localization with unit 4.)
In September 2005, AECL signed a technology development agreement with CNNC which opened the possibility of it supplying further Candu-6 reactors and undertaking fuel cycle developments based on them. This agreement with CNNC was passed to its subsidiary, the Nuclear Power Institute of China (NPIC). From 2008 it has focused on joint development of the Advanced Fuel Cycle Candu Reactor (AFCR) – see R&D section of China Fuel Cycle paper.

HTR, HTR-200, HTR-600, etc

In February 2006, the State Council announced that the small high-temperature gas-cooled reactor (HTR) was the second of two high priority National Major Science & Technology Projects for the next 15 years. This aims at exploring co-generation options in the near-term and producing hydrogen in the long term.
The small HTR-PM (HTR Pebble-bed Modular) units with pebble bed fuel and helium coolant were to be 200 MWe reactors, similar to that then being developed in South Africa, but plans have evolved to make them twin 105 MWe (equivalent) reactors so that they can retain the same core configuration as the prototype HTR-10. The twin units, each with a single steam generator, will drive a single steam turbine. Core height is 11 metres, and steam will be at 566°C. The engineering of the key structures, systems, and components is based on Chinese capabilities, though they include completely new technical features. Thermal efficiency of 40%, localization 75%, and 50-month construction for the first unit is envisaged.
China Huaneng Group (CHNG) is the lead organization in the consortium to build the demonstration Shidaowan HTR-PM with China Nuclear Engineering & Construction Group (CNEC) and Tsinghua University's INET, which is the R&D leader. Chinergy Co., a joint venture of Tsinghua and CNEC, is the main contractor for the nuclear island. Following the agreement on HTR industrialization cooperation between CNEC and Tsinghua University in 2003, the two parties signed a further agreement on commercialization of the HTR in March 2014. CNEC is responsible for the HTR technical implementation, and becomes the main investor of HTR commercial promotion at home and abroad.
Thus the initial HTR-PM will pave the way for commercial versions with multiple modules each 2x105 MWe with its own turbine, hence 400 MWe, 600 MWe or 800 MWe reactor units.* The main promotion is of the 600 MWe version. (It is possible that these commercial HTR plants will have larger turbines.) Then in April 2015 CNEC announced that its proposal for two commercial 600 MWe HTRs at Ruijin city in Jiangxi province had passed an initial feasibility review. This HTR-600 is based on HTR-200 by adding modules. CNEC and the provincial government will apply to NDRC for approval, and hope to start construction in 2017 for grid connection in 2021. No major utility has been named yet.
* An earlier proposal was for 18 further 210 MWe units at the same site – total 3800 MWe, but this has been dropped.
(See also Research and development section in page on China's Nuclear Fuel Cycle).

Fast neutron reactor

Longer-term, fast neutron reactors (FNRs) are seen as the main technology, and CNNC expects the FNR to become predominant by mid-century. A 65 MWt fast neutron reactor – the Chinese Experimental Fast Reactor (CEFR) – near Beijing achieved criticality in July 2010, and was grid-connected a year later.6 Based on this, a 600 MWe pre-conceptual design was developed. The current plan is to develop an indigenous 1000 MWe design to begin construction in 2017, and commissioning 2023. This is known as the Chinese Demonstration Fast Reactor (CDFR) project 1. It is intended to be followed by a CFR1000 for commercial operation from 2030, according to China Institute of Atomic Energy. Xiapu in Fujian province is reported to be a second FNR site.
In addition to CDFR project 1, in October 2009, an agreement with Russia confirmed earlier indications that China would opt for the BN-800 technology as CDFR project 2. The 880 MWe gross BN-800 reactor which has been built by OKBM Afrikantov at Beloyarsk in Siberia is the reference design and the first two in China were planned to start construction in 2013 at Sanming, Fujian province, with the first to be in operation in 2019 (see see section below on Sanming). However, negotiations on price delayed the project and NIAEP-Atomstroyexport then expected the first contracts to be in place at the end of 2014, but the project is reported to be suspended indefinitely. 
See also Fast neutron reactors section in page on China's Nuclear Fuel Cycle.

Embarking upon Generation III plants 

In September 2004, the State Council approved plans for two units at Sanmen, followed by six units at Yangjiang (two to start with), these to be 1000 or 1500 MWe reactors pioneering Generation III nuclear technology from overseas. The Sanmen (in Zhejiang province) and Yangjiang (in Guangdong province) reactors were subject to an open bidding process for third-generation designs, with contracts to be awarded in mid-2006 – in the event, mid-2007 – putting them clearly into the 11th Five Year Plan.

Bidding process

This open bidding process underlined the extent to which China is making itself part of the world nuclear industry, and yet at first remaining somewhat ambivalent about that.
Three bids were received for the four Sanmen and Yangjiang reactors: from Westinghouse (AP1000 reactors), Areva (EPR) and Atomstroyexport (VVER-1000 model V-392). The State Nuclear Power Technology Corporation (SNPTC), directly under China's State Council, was in charge of technology selection for new plants being bid from overseas.
Some 200 experts spent over a year evaluating Generation III designs and in September 2006 most of the 34 assigned to decide voted for the AP1000. The key factors in choosing this were passive design, simplified safety system, modular construction giving more rapid build and better cost control, and smaller components allowing more ready localization. 
The USA, French and Russian governments were reported to be giving firm support as finance and support arrangements were put in place. The US Export-Import bank approved $5 billion in loan guarantees for the Westinghouse bid, and the French Coface company was expected similarly to finance Areva for its bid. The US Nuclear Regulatory Commission gave approval for Westinghouse to export equipment and engineering services as well as the initial fuel load and one replacement for the four units. Bids for both two-unit plants were received in Beijing on behalf of the two customers: China General Nuclear Power Co (CGN) for Yangjiang, and China National Nuclear Corporation (CNNC) for Sanmen. Bids were for the nuclear portion of each plant only, the turbine tenders to be called for subsequently.
Bids were assessed on level of technology, the degree to which it was proven, price, local content, and technology transfer – which apparently became the major factor. Areva and Westinghouse were short-listed. However, the decision on reactor type was delayed, and came under review at the highest political level, with CNNC evidently pushing for the use of indigenous second-generation designs for both sites.
In December 2006, 22 months after the bids were submitted and after several revisions to them, the Westinghouse AP1000 reactor design was confirmed for the four units – two each at Sanmen and Yangjiang. Early in 2007, the two units planned for the Yangjiang site were switched to Haiyang in the more northerly Shandong province, making way for two EPR units Areva was in negotiations to build at Yangjiang. Later in 2007, plans for the EPRs under consideration for Yangjiang were transferred to another Guangdong site – Taishan – since there was pressure to build a lot of capacity quickly at Yangjiang.

Sanmen 1&2 and Haiyang 1&2

A framework agreement was signed at the end of February 2007 between Westinghouse and SNPTC specifying Haiyang and Sanmen for the four AP1000 units. In July 2007, Westinghouse, along with consortium partner Shaw, signed the contracts with SNPTC, Sanmen Nuclear Power Company (51% owned by CNNC), Shangdong Nuclear Power Company (61% owned by CPI) and China National Technical Import & Export Corporation (CNTIC) for four AP1000 reactors. Specific terms were not disclosed but the figure of $5.3 billion for the first two was widely quoted. In December 2007 the Chinese and US governments signed the intergovernmental agreement for the construction of AP1000 projects in China and technology transfer.
Sanmen site works commenced in February 2008 and full construction on Sanmen 1 – the world's first AP1000 unit – officially commenced on 19 April 2009. The reactor was expected to begin operation at the end of 2015 with the second less than one year later. First concrete at Haiyang 1 was in September 2009, and the pressure vessel was installed in January 2012. The Haiyang units are expected to commence operation in 2016. Construction has been slower than planned, the main problem being with US-made main coolant pumps (four in each reactor). These worked well in normal operation but had insufficient inertia to continue long enough for full passive safety effectiveness when not powered. Following successful tests, the modified pumps are being shipped from Curtis-Wright to Sanmen in October 2015.

AP1000 construction and equipment contracts

Westinghouse and Shaw Group have an engineering, procurement, commissioning and start-up as well as project management contract with SNPTC for the first four reactors (Sanmen & Haiyang). Also Shaw has a contract with State Nuclear Power Engineering Corp. Ltd, a SNPTC subsidiary, for technical support for the first two Dafan, Xianning units in Hubei province, including engineering and design management, project controls, quality assurance, construction management and project management.
In April 2007, Westinghouse signed a $350 million contract with Doosan Heavy Industries in Korea for two pressure vessels and four steam generators for Sanmen 1 and Haiyang 1. The pressure vessels for the other two units are being made by Chinese manufacturers: China First Heavy Industries (CFHI, also known as YiZhong) for Sanmen 2 and Shanghai Electric Group Corporation (SEC) for Haiyang 2. Steam generators for Sanmen 2 and Haiyang 2 were manufactured by Harbin Power Equipment Co., Ltd. (HPEC, now Harbin Electric Co, HEC) and SEC, respectively, though a contract for Sanmen 2 steam generators was let to Spain's ENSA in 2011. The Sanmen 1 reactor pressure vessel arrived on site from Doosan in July 2011.
All four steam turbine generators were supplied by Mitsubishi Heavy Industries (MHI). In a $521 million deal, Sanmen Nuclear Power ordered two turbine generator packages from MHI at the end of September 2007, with Shandong Nuclear Power ordering another two early in 2008. MHI's Takasago Machinery Works manufactured the turbines, including rotors and blades. Mitsubishi Electric Corporation is supplying the generators and Harbin Electric Co (HEC), partnering with MHI, was responsible for turbine casings, piping and associated facilities. The turbines boost the capacity of the reactors from their original 1175 MWe to 1250 MWe gross. 
In 2014 Westinghouse said that the second plant at each site saw a 30% reduction in manpower requirements compared with the first unit. The company is also working on the next eight units in China and expects about a 50% productivity increase compared with the first two Chinese AP1000 units.
The AP1000 Technology Transfer agreement to SNPTC covered 34 task packages in 7 categories, and in 2011 the process was still under way, with 78% of the documentation done by August. Some 27 sublicence agreements involved 30 entities.
In November 2010, further contracts were signed between SNPTC and Westinghouse, including one for Westinghouse to provide SNPTC with technical consulting services in research and development of the CAP1400 nuclear power plant, to be developed by SNPTC with Chinese intellectual property rights. Westinghouse said that having shared design technology with SNERDI, it expected 100% localization by 2015.
In January 2011, a further agreement was signed with SNPTC to deploy further AP1000 units, and to extend the 2008 technology cooperation agreement for another two years. SNPTC said the deal also included measures "to develop cooperation in the field of overseas markets." Another agreement was signed with China Baotou Nuclear Fuel Co "to design, manufacture and install fuel fabrication equipment that will enable China to manufacture fuel" for AP1000 units. The latter $35 million contract involves supply and installation of US equipment at Baotou.
In June 2011 Westinghouse confirmed that as part of the earlier construction agreement it would transfer intellectual property rights to SNPTC. In September 2014 Westinghouse said that it expected to be involved in orders for eight further units, followed by 12 more inland and 12 on the coast. It expected “to have 20 AP1000 units under construction in the next five years in China.”
In 2015 SNPTC merged with CPI and took over all its nuclear business as a sub-group of the new State Power Investment Corporation (SPI) entity. It then claimed that its supply chain could support construction of 6-8 AP/CAP units each year, with up to five suppliers for each key item.

Taishan 1&2 EPR

In February 2007, EDF entered a cooperation agreement with CGN (then: CGNPC) to build and operate a two-unit EPR power station at Yangjiang in Guangdong province. This deal was not expected to involve the technology transfer which is central to the Westinghouse contracts, since the EPR has multiple redundant safety systems rather than passive safety systems and is seen to be more complex and expensive, hence of less long-term interest to China. However, negotiations with Areva and EDF dragged on and in August 2007 it was announced that the EPR project had been shuffled to Taishan (in Guangdong) so that six CPR-1000 units previously planned for that site could be built at Yangjiang as soon as possible.
At a November 2007 ceremony attended by Chinese president Hu Jintao and French president Nicolas Sarkozy in Beijing's Great Hall of the People, Areva initialed an €8 billion contract with CGN for the two EPRs at Taishan plus supply of fuel to 2026 and other materials and services for them. The whole project, including fuel supply, totals €8 billion, of which the nuclear reactors themselves were reported to be about €3.5 billion. Steam turbine generators costing €300 million are included in the larger sum. The Guangdong Development Commission quoted the total investment in both units as CNY 49.85 billion ($7.3 billion). The joint venture partners will put up CNY 16.45 billion and the balance will be borrowed with guarantee from the Central Bank of France. French export credits for the project are reported as €1.7 billion ($2.4 billion), covering purchase of equipment such as steam generators for unit 1 from French suppliers.
In August 2008, EDF and CGN signed the final agreements for the creation of Guangdong Taishan Nuclear Power Joint Venture Company Limited (TNPC). EDF will hold 30% of TNPC for a period of 50 years (the maximum period permitted for a joint venture in China), CGN 70%. TNPC will oversee the building, then own and operate the plant. EDF is paying €600 to 800 million over four years for this share, subject to approval by the National Development and Reform Commission (NDRC) and the Ministry of Commerce. (EDF is project manager and architect for the Flamanville 3 EPR project in France, and this initiative consolidates its change in corporate strategy outside France.) 
CGN authorised construction at Taishan in July 2008 and first concrete was poured in October 2009, though the official inauguration ceremony was not until 21 December. The first unit was expected to be connected to the grid early in 2014 with commercial operation two months later, and the second was to be completed in 2015, but they are at least two years behind. The major components for unit 1 are imported: the pressure vessel from Mitsubishi Heavy Industries (MHI) in Japan and the steam generators from Areva Chalon/St. Marcel in France, but those for unit 2 are all built in China: the pressure vessel by Dongfang Electric (DEC), the steam generators by DEC (two) and Shanghai Electric (two). The Arabelle steam turbines and 1750 MWe generators are being purchased separately from Alstom and Dongfang Electric Co respectively. The first generator was shipped by DEC in August 2013. In March 2012 Areva said unit 1 was 69% complete, with reactor pressure vessel delivered.
In April 2013 Areva, EDF and CGN signed a tripartite agreement for “deeper industrial and commercial cooperation” in building new nuclear power plants and improving all CGN units. However, as of 2013 it appears that not more than two further EPR units will be built in China.

Indigenous Generation III plants

Late in 2012 the National Energy Administration (NEA), reflecting State Council views, made it clear that indigenous reactor designs needed to be progressed to Generation III safety standards. See comments above on ACP1000, ACPR1000 and Hualong One.

Nuclear growth

The first two nuclear power plants in mainland China were at Daya Bay near Hong Kong and Qinshan, south of Shanghai, with construction starting in the mid-1980s. Localisation has risen from 1% at Daya Bay to 64% at Ling Ao and 85% at Yangjiang.
China's concerted nuclear expansion began with the National Development and Reform Commission's (NDRC's) Tenth Economic Plan for the years 2001-2005, with increased self-reliance. (China's first economic plan was in 1953 and began China's centrally planned industrialization under Mao Zedong.) It incorporated the construction of eight nuclear power plants, though the timeline for contracts was extended, putting the last two projects into the 11th plan. The Eleventh Economic Plan for the years 2006-2010 set even more ambitious goals than the Tenth for new nuclear plant construction, and marked a watershed in China's commitment to third-generation reactors, such as the Sanmen plant in Zhejiang province and Haiyang plant in Shandong province (see section above on Reactor technology) as well as maturing of CPR-1000 technology. The 11th Five-Year Plan (2006-10) also had firmer environmental goals than previously, including reduction of 20% in the amount of energy required per unit of GDP, i.e. 4% reduction per year. 
In 2007, it was announced that three state-owned corporations had been approved by NNSA to own and operate nuclear power plants: CNNC, CGN and China Power Investment Corporation (CPI). Any other public or private companies are to have minority shares in new projects, which is proving a severe constraint on the ambitions of the country's main power utilities (including Huaneng, Huadian, Datang and Guodian), all of which have set up nuclear subsidiaries or become involved in nuclear projects. CGN is increasingly preeminent in actual nuclear power plants.
The 12th Five-Year Plan (2011-15) included construction start on phase II of Tianwan, Hongyanhe, Sanmen and Haiyang, as well as phase I of inland sites: Taohuajiang, Xianning, and Pengze (2 reactors each except Taohuajiang: 4). By the end of the 12th Five Year Plan some 25 GWe of new capacity was planned to be operational, making some 40 GWe, and 45 GWe more might be added by the end of the 13th Five Year Plan. The 12th Five-year science & technology plan released in July 2011 called for building a demonstration CAP-1400 plant for grid connection in 2015 and the demonstration HTR-PM to begin test operation at Shidaowan before 2015. Construction starts were delayed following the Fukushima accident, and all the inland plants were put on hold.
More than 16 provinces, regions and municipalities announced intentions to build nuclear power plants in the 12th Five Year Plan 2011-15. so that nuclear plants were operating or under construction in all coastal provinces except Hebei. Provinces put together firm proposals by 2008 and submitted them to the central government's National Development and Reform Commission (NDRC) for approval during 2009. NRDC consideration is via the new National Energy Administration (NEA). A great many proposals were received, many of which will be deferred to the 13th Plan.
The approvals process in China has three stages:
  1. Siting and feasibility study, with project approval from NDRC.
  2. Construction, requiring first a construction permit and later a fuel loading permit from NNSA.
  3. Commissioning, leading to NNSA operating permit.
In 2014 CPI had plans to achieve 14 GWe of operational capacity by 2020, with 10 GWe under construction then, at nine sites with 40 units. All of this except phase I of Hongyanhe (4xCPR-1000) would be AP1000.
The complex ownership structure of Chinese nuclear plants is described in Appendix 1: Government Structure and Ownership, and China's considerable heavy engineering and manufacturing capacity is detailed in the information page on Heavy Manufacturing of Power Plants. The capacity at the end of 2013 was for eight sets of reactor equipment per year – over 8000 MWe.
On the people and skills front, 47 colleges and research institutes have nuclear major, and more than 2000 graduate each year (4000 in 10th Five-Year Plan, 11,000 in 11th Five-Year Plan).

Nuclear technology exports

China has a determined policy at NDRC level of exporting nuclear technology, based on development of the CAP1400 reactor with Chinese intellectual property rights and backed by full fuel cycle capability. The policy is being pursued at a high level politically, utilising China's economic and diplomatic influence. CNNC and SNPTC are focused on the export potential of the CAP1400, and SNPTC aims at “exploration of the global market” from 2013, particularly in South America and Asia. In January 2015 the cabinet announced new incentives and financing for industry exports, particularly nuclear power and railways, on the back of $103 billion outbound trade and investment in 2014.

Export sales and prospects for Chinese nuclear power plants
Country Plant Type Est. cost Company Status, financing
Pakistan Chasma 3&4 CNP-300 $2.37 billion CNNC Under construction, Chinese finance 82% of $1.9 billion
  Karachi Coastal Hualong One $9.6 billion CNNC Planned, $6.5 billion vendor finance, maybe 82% China finance
Romania Cernavoda 3&4 Candu 6 €6.5 billion CGN Planned, Chinese finance
Argentina Atucha 3 Candu 6   CNNC Planned, with local involvement and $2 billion Chinese financing
  Atucha 4 or other site Hualong One   CNNC Vendor financing envisaged
UK Bradwell Hualong One   CNNC/CGN  
Turkey ? AP1000 or CAP1400   SNPTC Exclusive negotiations involving Westinghouse
South Africa   CAP1400   SNPTC Prepare for submitting bid
    HTR600   CNEC  

In Pakistan, two new 300 MWe CNP-300 PWR units are being built at Chasma, joining the two built there earlier. In 2013 CNNC announced an export agreement for twin ACP1000 units, for Pakistan’s Karachi Coastal Power station, costing $9.6 billion. This will now use Hualong One technology.
In May 2014 Romania’s Nuclearelectrica signed an agreement with CGN to explore the prospect of building two new reactors at Cernavoda, which currently has two Candu 6 reactors. In November 2013 two nuclear cooperation agreements were signed by Nuclearlectrica with CGN, one a letter of intent relating to construction of units 3&4.
In July 2014 a high-level agreement was signed by Argentine and Chinese presidents towards construction of Atucha 3 as a PHWR unit. CNNC will provide most of the equipment and technical services under long-term financing. Candu Energy will be a subcontractor to CNNC. In September the utility NASA signed a commercial framework contract with CNNC to progress this, with CNNC’s Qinshan Phase III units as reference design for a Candu 6 unit. It will have $3.8 billion in local input and $2 billion from China and elsewhere under a long-term financing arrangement.
SNPTC is keen to export the CAP1400 reactor, and considers Turkey and South Africa to be good prospects. In November 2014 SNPTC signed an agreement with Turkey’s utility EUAS and Westinghouse to begin exclusive negotiations to develop and construct a four-unit nuclear power plant in Turkey. In December 2014 it signed two agreements in South Africa with a view to nuclear power plant construction, and CNNC signed another there.
CNEC has promoted the HTR technology to Dubai, UAE, Saudi Arabia, South Africa and Indonesia, and has signed agreements with some of them.
As well as specifically nuclear exports, the State Grid Corporation of China (SGCC) is building a 2084 km UHV DC transmission line in Brazil, for over $2.3 billion.

Operating nuclear plants: varied beginnings to 2010

Daya Bay, Ling Ao Phase I

These are essentially on the one site in Guangdong province, close to Hong Kong. The Daya Bay reactors are standard 3-loop French PWR units supplied by Framatome and designated M310, with GEC-Alstom turbines. Electricite de France (EDF) managed construction, starting August 1987, with the participation of Chinese engineers. Commercial operation of the two Daya Bay units was in February and May 1994. There were long outages in 1994-96 when Framatome had to replace major components. Reactor vessel heads were replaced in 2004. The plant produces about 13 billion kWh per year, with 70% transmitted to Hong Kong  and 30% to Guangdong.
The Ling Ao Phase I reactors are virtually replicas of adjacent Daya Bay units. Construction started in May 1997 and Ling Ao 1 started up in February 2002 entering commercial operation in May. Ling Ao 2 was connected to the grid about September 2002 and entered commercial operation in January 2003. The two Ling Ao reactors use French M310 technology supplied by Framatome (now Areva), but with 30% localisation. They are reported to have cost $1800 per kilowatt.
Daya Bay and Ling Ao I & II together comprise the 'Daya Bay nuclear power base' managed by Daya Bay Nuclear Power Operations & Management Co (DNMC), part of China General Nuclear Power Group (CGN). For Ling Ao Phase II, see below.

Qinshan

Qinshan 1 in Zhejiang province 100 km southwest of Shanghai, is China's first indigenously-designed and constructed nuclear power plant (though with the pressure vessel supplied by Mitsubishi, Japan). Design of the 300 MWe PWR was by the Shanghai Nuclear Engineering Research & Design Institute (SNERDI). Construction work spanned 6.5 years from March 1985, with first grid connection in December 1991. It was shut down for 14 months for major repairs from mid-1998.
In October 2007, Qinshan 1 was shut down for a major upgrade. The entire instrumentation and control system was replaced, along with the reactor pressure vessel head and control rod drives. Areva NP supervised the work, which is likely to lead to life extension beyond the original 30 years.
Qinshan Phase II units 1&2 are locally-designed and constructed 2-loop PWR reactors, scaled up from Qinshan 1, and designated CNP-600. Local content was 55%. Unit 1 started up at the end of 2001 and entered commercial operation in April 2002. Unit 2 started up in March 2004, with commercial operation in May 2004. Units 3 & 4 are similar, with local content of 77%. After 53 months construction, unit 3 was grid connected on 1 August 2010, and entered commercial operation 12 weeks later8. Unit 4 was grid-connected in November 2011 and entered commercial operation in April 2012. CNNC claims that Qinshan phase II "is the first independently-designed, built, managed and operated large commercial nuclear power station in China."
Construction of the second stage of Qinshan Phase II was formally inaugurated at the end of April 2006, though first concrete had been poured for unit 3 in March. That for unit 4 was poured in January 2007. Local content of the two 650 MWe CNP-600 reactors is more than 70% and they entered commercial operation in 2010 and 2012.
In 2004, CNNC announced that the next two Qinshan units would be 1000 MWe indigenous units (in effect Fangjiashan, adjacent to Qinshan 1, has taken over this role).
Qinshan Phase III units 1&2 use the Candu 6 pressurised heavy water reactor (PHWR) technology, with Atomic Energy of Canada (AECL) being the main contractor of the project on a turnkey basis. Construction began in 1997 and unit 1 started up in September 2002 and unit 2 in April 2003. They are each about 678 MWe net.

Tianwan phase I

Tianwan Phase I at Lianyungang city in Jiangsu province is a Russian AES-91 power plant (with two 1060 MWe V-428 VVER reactors) constructed under a cooperation agreement between China and Russia – the largest such project ever. The cost is reported to be $3.2 billion, with China contributing $1.8 billion of this. Completion was delayed due to corrosion in the steam generators which resulted in some tubes having to be plugged with a net loss of capacity of about 2%. The first unit was grid connected in May 2006 and put into commercial operation in June 2007. The second was grid connected in May 2007, with commercial operation in August 2007. Design life is 40 years. 

Ling Ao Phase II

While the bidding process for the delayed Generation III plants from overseas vendors was in train over more than two years (see section above on Embarking upon Generation III plants), the China General Nuclear Power Group (CGN) signed contracts with Chinese designers and manufacturers for two reactors as Phase II of the Ling Ao power station (also known as Ling Dong). Construction started in December 2005 with the 1080 MWe (gross), 1037 MWe (net) units. They are transitional M310 - CPR-1000 units of 1037 MWe net. Unit 1 is about 50% localized and unit 2 is 70% localized, built under the project management of China Nuclear Power Engineering Corporation (CNPEC), part of CGNPC. Low-speed Arabelle turbine-generator sets were provided by Alstom. In June 2009, the first Chinese-made reactor pressure vessel for a 1000 MWe class reactor was delivered for unit 2, from Dongfang (Guangzhou) Heavy Machinery Co. Unit 1 started up in June 2010 with grid connection in mid-July, 54 months after construction start, and entered commercial operation in September. Unit 2 is expected to commence operation in 2011. Unit 2 was grid connected in May, 60 months after construction start, and commenced commercial operation on schedule in August 2011. The plant is managed by Daya Bay Nuclear Power Operations & Management Co (DNMC).
Operating nuclear reactors
Units Province Net capacity (each) Type Operator Commercial operation
Daya Bay 1&2 Guangdong 944 MWe French M310 CGN 1994
Qinshan Phase I Zhejiang 298 MWe CNP-300 CNNC April 1994
Qinshan Phase II, 1&2 Zhejiang 610 MWe CNP-600 CNNC 2002, 2004
Qinshan Phase II, 3&4 Zhejiang 620 MWe CNP-600 CNNC 2010, 2012
Qinshan Phase III, 1&2 Zhejiang 678 MWe Candu 6 PHWR  CNNC 2002, 2003
Fangjiashan 1&2 Zhejiang 1020 MWe CPR-1000 (M310+) CNNC Dec 2014, Feb 2015
Ling Ao Phase I, 1&2 Guangdong 938 MWe French M310 CGN 2002, 2003
Ling Ao Phase II, 1&2 Guangdong 1026 MWe CPR-1000 (M310) CGN Sept 2010, Aug 2011
Tianwan 1&2 Jiangsu 990 MWe VVER-1000 CNNC 2007, 2007
Ningde 1&2 Fujian 1020 MWe CPR-1000 CGN & Datang April 2013, May 2014
Ningde 3 Fujian 1020 MWe CPR-1000 CGN & Datang June 2015
Hongyanhe 1&2 Liaoning 1024 MWe CPR-1000 CGN & SPI June 2013, May 2014
Hongyanhe 3 Liaoning 1020 MWe CPR-1000 CGN & SPI Aug 2015
Yangjiang 1&2 Guangdong 1021 MWe CPR-1000 CGN March 2014, June 2015
Fuqing 1&2 Fujian 1020 MWe CPR-1000 (M310+) CNNC & Huadian Nov 2014, (late 2015)
Total: 27 24,196 MWe 

In addition, the China Experimental Fast Reactor (CEFR) is grid-connected and producing 20 MWe. It is included in IAEA figures for operational reactors.

 

Nuclear plants under construction and planned

China General Nuclear Power (CGN) expected to spend $ 9.5 billion on its Ling Ao Phase II, Yangjiang and Taishan nuclear power plants by 2010 and to have 6000 MWe on line by then, with 12,000 MWe under construction. Work is under way at all these sites and others. It also planned to start on the Lufeng plant in Guangdong and Wuhu in Anhui province, but awaited NDRC approval. It is expecting to have 34,000 MWe nuclear capacity on line by 2020, providing 20% of the province's power, and 16,000 MWe under construction then. From 2010 it expected to commission three units per year and, from 2015, four units per year. CGN is also, due to State Council policy, committed to developing significant wind capacity through CGN Wind Co. It projects a total of 500 MWe by 2020.


China Nuclear Power Plant Construction
China Nuclear Power Plant Construction
Jesper Antonsson (data from PRIS) 2015. Red = estimated completion.
In 2006, China National Nuclear Corporation (CNNC) signed agreements in Liaoning, Hebei, Shandong and Hunan provinces and six cities in Hunan, Anhui and Guangdong provinces to develop nuclear projects. CNNC has pointed out that there is room for 30 GWe of further capacity by 2020 in coastal areas and maybe more inland such as Hunan "where conditions permit". In October 2007, CNNC's list of projects included Chuanshan (Jiangsu province), Jiyang (Anhui), Hebao Island (Guangdong), Shizu (Chongqing), Xudabao/ Xudapu (Liaoning) and Qiaofushan (Hebei) amongst others.
Since then, announcements from CNNC, CGN and others are reported in the individual reactor reports in the second half of this paper.

Nuclear reactors under construction and planned 
Plant Province MWe gross Reactor model Project control Construction start Operation, grid connect
Hongyanhe
unit 4
Liaoning 1119 CPR-1000 CGN, with SPI 8/09 late 2015
Ningde
unit 4
Fujian 1089 CPR-1000 CGN, with Datang 9/10 early 2016
Yangjiang 3&4 Guangdong 2x1089 CPR-1000+ CGN 11/10, 11/12  late 2015, 2017
Sanmen
units 1&2
Zhejiang 2x1250 AP1000 CNNC 3/09, 12/09 2016, 2017
Haiyang
units 1&2
Shandong 2x1250 AP1000 SPI 9/09, 6/10 12/2015, 3/16
Taishan
units 1&2
Guangdong 2x1750 EPR CGN 10/09, 4/10 early 2016, late 2016
Shandong Shidaowan Shandong 210 HTR-PM Huaneng 12/12 2017
Fangchenggang
units 1&2
Guangxi 2x1080 CPR-1000 CGN 7/10, 2011 2015, 2016
Changjiang
units 1&2
Hainan 2x650 CNP-600 CNNC & Huaneng 4/10, 11/10 2015, 12/2015
Fuqing
units 3&4
Fujian 2x1080 CPR-1000 (M310+) CNNC & Huadian 12/10, 11/12 late 2015, 2017
Tianwan units 3&4 Jiangsu 2x1060 VVER-1000 V-428M CNNC 12/12, 9/13 2/2016, 3/2017
Yangjiang
units 5&6
Guangdong 2x1080 ACPR1000 CGN 9/13, 12/13 2018, 2019
Hongyanhe
units 5&6
Liaoning 2x1080 ACPR1000 CGN, with SPI 3/15, 7/15 11/2019, 8/2020
Shidaowan
units 1&2
Shandong 2x1400 CAP1400  SNPTC & Huaneng 5/15, 8/15 12/2019, 2020
Fuqing
units 5&6
Fujian 2x1150 Hualong 1 CNNC & Huadian 5/15, 2015* 2019, 2020
Fangchenggang
units 3&4
Guangxi 2x1150 Hualong 1  CGN late 2015, 2016* 2020, 2021
Ningde
units 5&6
Fujian 2x1150 Hualong 1 CGN & Datang early 2016, 2017* 2021, 2022
Xudabao/Xudapu
units 1&2
Liaoning 2x1250 AP1000 CNNC, Datang 2015-16* 2019, 2020
Sanmen
units 3&4
Zhejiang 2x1250 AP1000 CNNC 2015-16*  
Haiyang
units 3&4
Shandong 2x1250 AP1000 SPI 2015-16*  
Lufeng (Shanwei)
units 1&2
Guangdong 2x1250  AP1000 CGN 2015-16* 2019, 2020
Fangchenggang
units 5&6
Guangxi 2x1250 AP1000 CGN 2015-17  
Bailong
units 1&2
Guangxi 2x1250 AP1000 SPI 2015-17  
Huizhou
units 1&2
Guangdong 2x1250 AP1000 CGN 2015-18  
Putian, Zhangzhou
units 1&2
Fujian 2x100 ACP100 CNNC & Guodian 2015 2017
Tianwan
units 5&6
Jiangsu 2x1080 ACPR1000 CNNC 11/15, 2017  
Taishan
units 3&4
Guangdong 2x1750 EPR? CGN 2015-18  
Changjiang
units 3&4
Hainan 2x650 CNP-650 or
ACP-600
CNNC & Huaneng 2015-18  
Zhangzhou
units 1-4
Fujian 4x1250 AP1000 Guodian & CNNC 2016  
Sanming
units 1&2
Fujian 2x880 BN-800? CNNC ? 2025?
Taohuajiang
units 1-4
Hunan (inland) 4x1250 AP1000 CNNC 2016 -18*  
Pengze
units 1&2
Jiangxi (inland) 2x1250 AP1000 SPI 2016-17*  
Xianning (Dafan)
units 1&2
Hubei (inland) 2x1250 AP1000 CGN 2016-17*  
  Under construction 1x1119
3x1089
1x210
4x1250
1x1150
2x1750
8x1080
2x650
2x1060
=26,306
 
  Planned: 2x1080
5x1150
26x1250
2x1750
2x1400
2x880
2x650
2x100
=49,970
 
Total: 6724 Under const
35 + 8 Planned
26,306
49,970
 

Where construction has started, the dates are marked in bold. Those here not under construction are marked as 'planned' in the WNA reactor table. At 18 August 2015, 24 under construction: 26,306 MWe; 43 planned: 39,970 MWe (gross) coastal plus 10,000 MWe inland, total 49,970 MWe.
Fangjiashan is sometimes shown as a development of Qinshan Phase I. * approved by NDRC, but construction delayed post-Fukushima

Further nuclear power units proposed
Plant Province MWe gross Expected model Project control Construction Start up
Nanchong (Nanchun, Sanba) units 1-4 Sichuan 4x1150 Hualong 1 CGN    
Shidaowan
units 3&4
Shandong 2x1250 AP1000 SNPTC & Huaneng    
Tianwan
units 7&8
Jiangsu 2x1200 VVER-1200
(AES-2006) 
CNNC    
Xianning (Dafan)
units 3&4
Hubei 2x1250 AP1000 CGN    
Pengze
units 3&4
Jiangxi 2x1250 AP1000 CPI    
Bailong
units 3&4
Guanxi 2x1250 AP1000 CPI    
Shidaowan
units 5&6
Shandong 2x1250 AP1000 SNPTC & Huaneng    
Ruijin
units 1&2
Jiangxi 2x600
(6x210)
HTR-600 CNEC 2017 2022
Haiyang
units 5&6
Shandong 2x1250 AP1000 CPI    
Hongshiding (Rushan)
units 1&2
Shandong 2x1150 Hualong 1 CNNC    
Cangzhou
units 1&2
Hebai 2x1150 Hualong 1 CNNC & Huadian    
Xiaomoshan
units 3&4
Hunan 2x1250 AP1000 CPI    
Pingnan/Baisha
units 1&2
Guangxi 2x1250 AP1000 CPI    
Pingnan/Baisha
units 3&4
Guangxi 2x1250 AP1000 CPI    
Xudabao/Xudapu
units 3-6
Liaoning 4x1250 AP1000 CNNC with Datang    
Lufeng (Shanwei)
units 3-6
Guangdong 4x1250? AP1000? CGN    
Yingtan
units 1-4
Jiangxi 4x1250 AP1000 Huaneng    
Nanyang
units 1-6
Henan 6x1250? AP1000
(if CPI)
CNNC (or CPI)    
Xinyang
units 1-4
Henan 4x1150 Hualong 1 CGN    
Changde (Chenzhou, Hengyang) Hunan 4x1150 Hualong 1 CNNC & Guodian?, CGN    
Zhangzhou
units 5&6
Fujian 2x1250 AP1000 CNNC & Guodian    
Jiyang/Chizhou
units 1&2
Anhui 2x1250? AP1000 CNNC    
Sanmen
units 5&6
Zhejiang 2x1250 AP1000 CNNC    
Cangnan
units 1&2
Zhejiang 2x1250 AP1000 CGN & Huaneng    
Fuling
units 1&2
Chongqing 2x1250 AP1000 CPI    
Jingyu
units 1&2
Jilin 2x1250 AP1000 CPI & Guodian    
Donggang
units 1&2
Liaoning 2x1150 Hualong 1? Huadian    
Xiapu
units 1-6
Fujian 6x1250 AP1000 Huaneng    
Wuhu
units 1&2
Anhui 2x1250 AP1000 CGN    
Ningdu
units 1&2
Jiangxi 2x100 ACP100 CNNC & Guodian    
Xiaomoshan
units 1&2
Hunan 2x1250 AP1000 CPI    
Yanjiashan/ Wanan/Ji'an
units 1&2
Jiangxi 2x1250 AP1000 CNNC    
Shaoguan
units 1-4
Guangdong (inland) 4x1250 AP1000 CGN    
Subtotal: 92 units   64x1250
18x1150
2x1200
6x200
2x100
=104,500 MWe
 
Further proposals (less definite or further away)
Cangzhou
units 3-6
Hebai 4x1250 AP1000 CNNC & Huadian    
Jiyang/Chizhou
units 3&4
Anhui 2x1250? AP1000? CNNC    
Cangnan
units 3-6
Zhejiang 4x1250 AP1000 CGN/Huaneng    
Longyou/Zhexi
units 1-4
Zhejiang 4x1250 AP1000 CNNC    
Haijia/Haifeng
units 1&2
Guangdong 2x1250 AP1000 CGN    
Fuling
units 3&4
Chongqing 2x1250 AP1000 CPI    
Jingyu
units 3&4
Jilin 2x1250 AP1000 CPI & Guodian    
Songjiang
units 1&2
Shanghai 2x1250? AP1000 CGN & Guodian    
Wuhu
units 3&4
Anhui 2x1250 AP1000 CGN    
Heyuan/Jieyang
units 1-4
Guangdong 4x1250 AP1000 CNNC? CPI?    
Xiaomoshan
units 5&6
Hunan 2x1250 AP1000 CPI    
Haiyang
units 7&8
Shandong 2x1250 AP1000 CPI    
Hengren
units 1-4
Liaoning 4x1250 AP1000 CPI    
Zhanjiang
units 1-4
Guangdong 4x1250 AP1000 CGN    
Xiangtan Hunan 4x1250 AP1000 Huadian?    
Donggang
units 3&4
Liaoning 2x1000   Huadian?    
Pulandian
units 1-4
Liaoning 4x1250 AP1000 Huaneng    
Shizu Chongqing 2x   CNNC    
Qiaofushan Hebai 2x   CNNC    
Xianning
units 5&6
Hubei 2x1250 AP1000 CGN    
Guangshui Hubei 4x1250 AP1000 CGN    
Zhingxiang Hubei 4x1250 AP1000 CNNC, Datang    
Hebaodao Guangdong 2x   CNNC?    
Yibin Sichuan 2x1250 AP1000 CNNC    
Gulei
units 1&2
Fujian 2x100 ACP100 CNNC-CNEC    
Hengfeng
units 1&2
Jiangxi 2x100 ACP100 CNNC & Guodian    
Tongren Guizhou 2x1250 AP1000 CGN    
Xiapu Fujian 1x210 HTR Huaneng    
Sanming or Xiapu
units 3&4
Fujian 2x880? BN-800? CNNC    
Jiamusi Heilongjiang 2x1150 Hualong 1 Huaneng & CNNC, or CGN    
Subtotal: about 79 units   62x1250
2x1150
8x1000 or?
2x880
1x210
4x100
=90,170 MWe 
 
Total proposed: about 170 194,670 MWe  

All PWR except Shidaowan and Ruijin HTRs, and Sanming BN-800. Some of these entries are based on sketchy information. For WNA reactor table, 80% of numbers and capacity from this table are listed as 'Proposed': 136 units and 153 GWe.

Hongyanhe, LHNP

This is the first nuclear power station receiving central government approval to build four units at the same time, and the first in northeast China. Construction of the first unit of the Hongyanhe nuclear power plant in Dalian, Liaoning, started in August 2007. It is the first nuclear power project in the 11th Five-Year Plan, with owner and operator being Liaoning Hongyanhe Nuclear Power Co, a joint venture of CGN and CPI (now SPI) – 45% each – with Dalian Construction Investment Group. It uses CPR-1000 reactors for units 1-4.
The National Nuclear Safety Administration (NNSA) issued a construction licence for units 3&4 in March 2009, and first concrete for unit 3 was poured soon afterwards. CGN will be responsible for the project construction and the operation of the first five years after commercial operation, with full participation of CPI. The cost of all four 1080 MWe CPR-1000 units in the first construction phase is put at CNY 50 billion (US$ 6.6 billion). China Nuclear Power Engineering Corporation (CNPEC), part of CGN, is managing the project. Shanghai Electric won a $260 million contract for equipment and Alstom providing the four low-speed Arabelle turbine-generator sets for $184 million. Localisation is above 70% for units 1&2 and over 80% for units 3&4. 
First power from unit 1 was expected in July 2012, but after delays over 2011 it started up in January 2013 and was grid connected in February, with commercial operation in June. Unit 2 started up in October 2013, was grid connected in November, with commercial operation in May 2014. Unit 3 started up in October 2014 and was grid connected in March 2015 (72 months construction) and entered commercial operation in August. Unit 4 is expected on line late in 2015. The project incorporates a 10,080 m3/day seawater desalination plant using waste heat to provide cooling water. 
In May 2010, the NRDC approved preliminary work on the CNY 25 billion two-unit second phase of the plant (units 5&6), and site work began in July. The National Nuclear Safety Administration (NNSA) and the Environment Ministry approved the project in September 2010, construction start was expected 2011 but following a State Council announcement and final NNSA construction licence, that for unit 5 was in March 2015 and for unit 6, July 2015. NDRC approval was reported in September 2014 and again in February 2015, using ACPR1000 reactors. Localisation is to be above 80%.

Ningde, NDNP

Construction of CGN's six-unit Ningde nuclear power plant commenced in 2008. This is on three islands in Fuding city in northeast of Fujian province, and the first construction phase comprises four CPR-1000 units. Ningde Nuclear Power Co Ltd (NDNP) was set up in 2006 as a joint investment of CGN (46%), China Datang Corporation (44%) and Fujian Energy Group Co., Ltd. The project was approved by the National Development & Reform Commission (NDRC) in September 2006, and local content will be about 75% for units 1&2 and 85% for units 3&4. It marks a significant step into nuclear power for Datang.
Construction of the first unit started in February 2008, and it was grid connected in December 2012 after 58 months. It was declared in commercial operation in April 2013. First concrete for the second unit was in November 2008, it achieved criticality in December 2013 and was grid connected in January 2014, with commercial operation in May. Construction start for the third was in January 2010 and for the fourth at the end of September 2010. First criticality for unit 3 was in March 2015, with grid connection two weeks later that month and commercial operatioon in June. Total cost for four units was put at CNY 52 billion ($7.6 billion). Dongfang Electric is supplying turbine generators for units 1-4, using Alstom Arabelle low-speed technology, at least for units 3&4. The pressure vessel and steam generators for unit 1 are from Dongfang (DFHM), those for unit 2 are from Shanghai Electric (SEC), those for units 3&4 from China First (CFHI). 
In February 2014 the NEA approved preliminary work for units 5&6, which are set apart from phase 1 units 1-4, with some siting issues to resolve. CGN has confirmed that they will be Hualong One (HPR1000).

Fuqing

Construction of the six-unit Fuqing nuclear power plant 170 km south of Ningde also commenced in 2008 at Qianxe, Fuqing city in Fujian, between Fuzhou and Putian. The Fujian Fuqing Nuclear Co Ltd was set up in May 2006 with 39% held by China Huadian Corp and 10% by Fujian Investment & Development Co Ltd. CNNC is responsible for the project which used CGN's CPR-1000 reactors for units 1-4 since alternatives were not licensed. CNNC calls these M310+. First concrete for unit 1 was poured in November 2008, for unit 2 in June 2009, and for unit 3 in December 2010. Commercial operation is expected over 2014 to 2016. Site works are under way for further units there, total expected cost for all six being CNY 88 billion ($14.3 billion). Construction of unit 4 started in September or October 2012, almost immediately after NNSA authorization. Unit 1 started up in July 2014, was grid connected in August after 69 months' construction and entered commercial operation in November. Unit 2 started up in July and was grid connected in August 2015 after 74 months' construction. Units 3&4 are expected in operation in early 2016 and 2017 respectively.
Construction of the project is by China Nuclear Power Engineering Co. (CNPE) and the reactor pressure vessels are supplied by China First Heavy Industries, as for Fangjiashan. In June 2008, Dongfang Electric Group announced a CNY 5 billion ($725 million) contract for Alstom Arabelle low-speed steam turbine generators for the Fuqing and Fangjiashan plants. Units 3&4 have Areva instrument & control systems. 
Late in 2010, CNNC was proposing the CNP1000 for units 5&6, noting "pre-project under way". In October 2011 CNNC said that units 5 & 6 would be the first ACP1000 units, and in December 2013 it was announced that they would have Areva-Siemens instrument and control systems. DEC will supply the steam generators. In January 2014 CNNC said that they would be CNNC’s first Hualong 1 units. Construction of unit 5, China’s first Hualong One, started in May 2015.

Fangchenggang

The Fangchenggang nuclear power project is located at Hongsha village, in the Beibu Gulf (Beibu Wan) Economic Zone on the southeast coast of Bailong Bay in the coastal city of Fangchenggang in the Guangxi Autonomous Region (45 km from the Vietnam border in south China). It is sometimes referred to as 'Fangcheng Port' and in ‘Western China’. Following an agreement in July 2006, the first stage (two 1080 MWe CPR-1000 units out of six planned) of the plant was approved by NDRC in October 2008, and again in July 2010. First concrete for unit 1 was poured in July 2010, and for unit 2, late in 2011. About 87% of the first two units will be sourced in China. 
In October 2009, a general construction contract was signed with CNPEC. Guangxi Fangchenggang Nuclear Power Co., Ltd., a joint venture between China Guangdong Nuclear Power Group (61%) and Guangxi Investment Group (39%), is responsible for the construction and operation. CPI was earlier involved. The first unit is expected to begin commercial operation in July 2015, the second a year later. Total budget is CNY 70 billion ($10.26 billion), with CNY 26 billion ($3.87 billion) for stage 1. In December 2011 it was reported that Guangxi was accelerating construction to relieve power shortage, and allow for exports to Vietnam. (There is also a Fangchenggang supercritical 2400 MWe coal-fired power station operated by CLP Guangxi Fangchenggang Power Company Limited, a 70:30 equity-basis joint venture between China Light & Power and Guangxi Water & Power Engineering (Group) Co., Ltd.)
CGN from September 2012 planned that Stage 2, units 3&4, should be the initial ACPR1000 demonstration units, with construction start in 2014. However, no authorization was forthcoming, and since January 2014 these are to be CGN’s inaugural Hualong HPR1000 units, based on CNP1000, with construction starting at the end of 2015. In May 2015 CGN ordered the steam generators from DEC, which subcontracted to BWX Technologies in Canada among others. Cost is put at about CNY 30 billion ($4.9 billion). Stage 3 (units 5&6) is planned as AP1000s.

Yangjiang, YNPS

Yangjiang city in western Guangdong province had originally been earmarked for the country's first Generation III plants (see section above on Embarking upon Generation III plants). After plans changed in the light of pressing generation needs in the region, Yangjiang will be the second nuclear power base of the China General Nuclear Power Group (CGN). Development of all six units of the Yangjiang plant was approved in 2004, with CPR-1000 later confirmed as the basic technology for it. Local content is about 83% for units 1&2, and is expected to be 85% for units 3&4 and maybe 90% for 5&6 of the evolved design – the first ACPR1000 reactors. Total cost was expected to be CNY 73 billion ($12.1 billion).
Construction of the first of two CPR-1000 units by CNPEC started in December 2008. Unit 1 criticality was achieved in December 2013, with grid connection at the end of the month and commercial operation in March 2014. Unit 2 was grid connected in March 2015 after 67 months' construction and entered commercial operation in June.
Construction of unit 3 started in November 2010, unit 4 in November 2012, immediately after NNSA authorization, then the final two (as the second construction phase) followed from September 2013, with the last to be built by 2018. Units 3&4 are the first of an improved CPR-1000 design sometimes referred to as CPR-1000+. Unit 3 criticality was in October 2015. Construction of unit 5 as ACPR1000 began in mid-September 2013 and unit 6 late in December 2013. 
Yangjiang 1-6 will be operated under Yangjiang Nuclear Power Co Ltd (YJNPC) management. In July 2010, Hong Kong-based power utility China Light and Power (CLP) agreed to take a 17% stake in Yangjiang – the equivalent of one reactor. However, in September 2013 CGN halted negotiations with CLP, following delays due China’s review of nuclear safety. These are expected to resume in 2014, and CLP expects eventually to take some equity in the plant.

Fangjiashan

Construction of CNNC's Fangjiashan plant started at the end of December 2008. It is close to the Qinshan plant in Zhejiang province and essentially an extension of it, using two CPR-1000 reactors, designated M310+ by CNNC. Construction of the CNY 26 billion ($4.2 billion) project was by China Nuclear Power Engineering Co. (CNPE) and the reactor pressure vessels are supplied by China First Heavy Industries, as for Fuqing. In June 2008, Dongfang Electric Group announced a CNY 5 billion ($725 million) contract for Alstom Arabelle low-speed steam turbine generators for the Fuqing and Fangjiashan plants. Localisation is 80%. First criticality of unit 1 was in October 2014 with grid connection in November and commercial operation in December 2014 and was grid connected in mid-January 2015. Unit 2 started up in December 2014, with grid connection in mid-January 2015 and commercial operation in February. The project is 72% owned by CNNC, with the remainder held by Zhejiang Provincial Energy Group Co Ltd. The two units bring the Qinshan total effectively to nine, with 6540 MWe.

Sanmen

At the end of 2006, the Westinghouse AP1000 reactor design was selected for Sanmen in Zhejiang province (and for Yangjiang in Guangdong province, with the latter site changed to Haiyang). Contracts with Westinghouse and Shaw for two units were signed in July 2007. Site works under CNNC commenced in February 2008 and an engineering, procurement and construction (EPC) contract was signed in March 2009 between SNPTC + CNNC and China Nuclear Engineering & Construction Group (CNEC) for both units, which will be overseen by Westinghouse and Shaw (now CB&I). Other stakeholders are Zhejiang Provincial Energy Group Co Ltd, CPI Nuclear Power Co Ltd, and China Huadian Corp. 
Construction on Sanmen 1 – the world's first AP1000 unit – officially commenced on 19 April 2009. The pressure vessel, from Doosan, was installed in September 2011. The reactor was expected to begin operation in December 2014 with unit 2 less than a year later. Construction on unit 2 commenced in mid-December 2009. The pressure vessel and steam generators for unit 2 are being made in China. MHI supplied the turbine generators for both units. CNEA in 2013 said the cost would be about $2610/kW. In March 2014 NNSA said that start-up would be delayed to December 2015 due to design changes and problems with the US-supplied main coolant pumps which created further delay. Following successful tests, the modified pumps are being shipped from Curtis-Wright to site in October 2015, and SNPTC predicts commercial operation in September 2016. See section on Embarking upon Generation III plants above.
Another six units are envisaged for the Sanmen site.

Haiyang

Shangdong Nuclear Power Company (a subsidiary of CPI) signed contracts with Westinghouse and Shaw for two AP1000 units in July 2007. First concrete was poured in September 2009 for unit 1 and June 2010 for unit 2. The 5000 cubic metre base mat of each was placed in a single pouring of less than 48 hours. The pressure vessel and steam generators for unit 2 are being made in China. MHI supplied the turbine generators for both units. These units were expected to commence operation in December 2014 and March 2015, but in March 2014 NNSA said that start-up would be delayed into 2015 due to design changes and component problems. However, problems with the US-supplied main coolant pumps may delay operation to 2016 or 2017. See section on Embarking upon Generation III plants above.
The site will eventually have six or eight units, and in March 2009, the NDRC approved preliminary works for units 3&4 at the CPI site. In February 2014 the MEP approved construction start on these, which are expected to cost CNY 31.4 billion ($5.1 billion).
Haiyang will be a CPI training base for AP1000 staff, along with a set-up at Yantai.

Taishan

The first two EPRs planned for Taishan in Guangdong province form part of an €8 billion contract signed by Areva and the China General Nuclear Power Group (CGN) in November 2007. The Taishan project (sometimes referred to as Yaogu) is owned by the Guangdong Taishan Nuclear Power Joint Venture Company Limited (TNPC), a joint venture between EDF (30%) and CGN. First concrete was poured in October 2009, and unit 1 is expected to be commissioned in 2016, with unit 2 a year later. Areva is sourcing the main components for both units from Japan and China and expects net capacity to be 1660 MWe each. See section on Embarking upon Generation III plants above.
Site works are reported to be proceeding for units 3&4.

Shandong Shidaowan HTR-PM 

A demonstration high-temperature gas-cooled reactor plant, with twin reactor modules driving a single 210 MWe steam turbine, was initially approved in November 2005, to be built at Shidaowan (Shidao Bay) in Weihai city, Shandong province, by Huaneng Shandong Shidaowan Nuclear Power Company Ltd (HSNPC). It will be part of the Rongcheng Nuclear Power Industrial Park project. The HSNPC joint venture is led by the China Huaneng Group Co – the country's largest generating utility but hitherto without nuclear capacity, and still without NNSA authority to build nuclear plants itself. Huaneng Power International is investing CNY 5 billion in the project, which received environmental clearance in March 2008. An important 20% stake in the project is held by Tsinghua University INET, reflecting its innovative technology, and 32.5% is held by CNEC, which is promoting commercial HTR versions. With site work complete, following NDRC approval construction started in mid-2011. Commercial operation is expected in 2017. (information on CGNPC and Tsinghua web sites) NB though involving twin reactors this is shown as a single reactor unit in WNA Tables.
The EPC (engineering, procurement, construction) contract was let in October 2008, and involves Shanghai Electric Co and Harbin Power Equipment Co. A simulator contract signed in May 2010 was between HSNPC, Chinergy and CGNPC Simulator Co. In November 2010 Huaneng Group signed an agreement with US-based Duke Energy to train nuclear plant staff.
After three years of negotiation, in March 2011 a contract was signed with SGL Group in Germany for supply of 500,000 machined graphite spheres for HTR-PM fuel by the end of 2013. A new HTR fuel production plant is being set up at Baotou.
This will be the demonstration plant for a larger commercial plant at Ruijin, Jianxi province. (See below, also Research and development section in page on China's Nuclear Fuel Cycle.)

Shidaowan PWRs

In November 2007, China Huaneng Group (CHNG) signed an agreement with CGN for the Huaneng Nuclear Power Development Co Ltd to build four CPR-1000 reactors at Shidaowan, Rongcheng, Weihi city, in Shandong province in an $8 billion deal. A letter of intent regarding the first two was signed in 2008. The project then became focused on the CAP1400, with SNPTC as the lead partner and two CAP1400 reactors as phase 1.
The State Nuclear Power Demonstration Plant Company (SNPDP) is a 55-45% joint venture company set up in December 2009 by SNPTC and China Huaneng Group (CHNG) to have overall responsibility for building and operating the first CAP1400 reactors and subsequent CAP1700 reactors (see Reactor technology section above), two CAP1400s being envisaged as demonstration units at Shidaowan. SNPTC will be in charge of building these.
The Environment Impact Assessment Report (EIAR), the Site Safety Assessment Report (SSAR) and construction application were submitted to Ministry of Environment Protection and NNSA in March 2012, and NNSA approval of both was expected in mid-2014. Site works for the first two CAP1400 units totaling 3.24 GWe were complete by April 2014. First concrete for unit 1 was expected in April 2015, with 56-month construction giving operation in December 2019. Unit 2 first concrete is due in August 2015 and operation in 2020.
In June 2014 the Ministry of Environment Protection was seeking comment on SNPTC plans for CAP1400 units 3&4, expected to cost CNY 42.3 billion. However, Huaneng, which owns the Rongcheng Industrial Park site, is keen to build four AP1000 units as phase 2, and this is now the plan. The eventual capacity of Shidaowan over 20 years is expected to be very large.

Bailong

This is a CPI project about 30 km from Fangchenggang in Guangxi province, with two AP1000 reactors in stage 1 and two more in stage 2. It is reported to be delayed by local opposition, and may be an alternative to stage 3 of Fangchenggang.

Huizhou

This is a CGN project in Huangbu town, Huidong county, Huizhou city on Red Bay close to Daya Bay, with two AP1000 reactors in its first stage and four more to follow. Initial investment by CGN and Huizhou city was estimated at CNY 80 billion in 2011. The project company is China Guangdong Huizhou Nuclear Power Co. The project passed its initial feasibility assessment by the provincial Development and Reform Commission in 2011. Some site works have been undertaken.

Tianwan Phases II, III & IV

In October 2006, a preliminary agreement for two further 1060 MWe AES-91 VVER reactors as the second construction phase at Tianwan in Lianyungang city of Jiangsu province was signed with Russia's Atomstroyexport. Preliminary approval from NDRC was received in August 2009, and the project was then expected to cost $3.8 billion. Protracted discussion on pricing for the Russian components of the plant delayed the project. Eventually, a contract for the engineering design of units 3&4 was signed in September 2010 between Jiangsu Nuclear Power Corporation and Atomstroyexport, and the general contract came into force in August 2011 with protocol signed by China Atomic Energy Authority and Rosatom. Final approval from NDRC was received in January 2011. The EPC contract with CNNC's China Nuclear Engineering & Construction Group (CNEC) was signed in October 2011. A civil engineering contract was let to China Nuclear Industry Huaxing Construction Company (HXCC) in May 2012, and to China Nuclear Industry 23 Construction Co for component installation in July. Both are CNEC subsidiaries. An intergovernmental protocol was signed in December 2012, with first concrete poured that month. In August 2013 the China Development Bank signed a loan agreement with Jiangsu Nuclear Power Co. for CNY 16 billion for phase II.
Atomstroyexport is providing 30% of the V-428M phase II units for €1.3 billion, including nuclear island equipment (reactor, steam generators, pressurisers, primary piping. etc.) and some related equipment. It is not acting as the principal contractor, though it insists on retaining intellectual property rights. Jiangsu Nuclear Power Corporation is responsible for about 70% of the project, namely, the civil work, turbine island with equipment and related infrastructure on the site. Iskorskiye Zavody, part of OMZ, is supplying the major components covered by the Russian €1.3 billion part of the phase II plant. This includes two reactor pressure vessels with internals and upper units. Delivery was to be completed in 2014. (The company already took part in making the major equipment for Tianwan 1&2, including reactor pressure vessels.) ZiO-Podolsk is making the steam generators – the third arrived on site in March 2015. The turbine generator sets will probably be sourced from Dongfang Electric, using Alstom Arabelle low-speed technology. Areva I&C systems are being used. 
First concrete for unit 3 was poured in December 2012, and that for unit 4 in September 2013. Commercial operation is due in 2018 and 2019. 
There has been some confusion about the technology for phase III, units 5&6. Due to urgency in meeting power demands, it appeared likely that units 5&6 (phase III) might be built ahead of 3&4, as CPR-1000 units, based on those at Fangjiashan. This technology prospect appeared to lapse with post-Fukushima sidelining of the design. But the CNNC website in October 2014 had them as 1000 MWe units, consistent with the 2012 decision to build as CPR-1000. An EPC contract between Jiangsu and CNPE was signed in February 2011, making CNPE the project manager, but saying then that Units 5&6 were likely to be VVER-1200s. Dongfang Electric has a contract to supply turbine generators using Alstom Arabelle low-speed technology. 
Phase IV is less ambiguous. In December 2012 Russian sources reported discussions with CNNC regarding phase IV of Tianwan (units 7&8), using VVER technology. In October 2013 China National Nuclear Power Co Ltd (CNNP) said that the technology might be VVER-1200/AES-2006 rather than VVER-1000/AES-91. Atomernergoproekt has quoted Leningrad’s V-491 reactors as reference units for later Tianwan units, now apparently just 7&8. In October 2014 Russia’s energy minister said that he expected Atomstroyexport to supply units 7&8 at Tianwan.

Changjiang

CNNC's Changjiang nuclear power plant on Hainan Island started construction in April 2010 for operation in 2015. It will eventually comprise four 650 MWe PWR units based on those at Qinshan Phase II. Total cost of the first pair of CNP-600 units is put at about CNY 20 billion ($2.8 billion). Unit 1 criticality was in October 2015. Units 3&4, probably ACP600, will be built as the second phase of construction from 2018. Huaneng Power International (HPI), part of China Huaneng Group (CHNG), holds a 49% share in Hainan Nuclear Power Co Ltd. More than 70% of the plant's equipment is to be made in China.

Xudabao

CNNC's Xudabao or Xudapu nuclear power station is in Xingcheng City, Huludao (Hulu island), in coastal Liaoning province. The CNY 110 billion (US$18 billion) Xudabao project will comprise six AP1000 or CAP1000 reactors, with units 1&2 in the first phase. Site preparation was under way in November 2010, and NNSA granted site approval for two units in April 2014. Final approval was reported in September 2014, and operation was due in May 2018, according to CNECC.
CNNC's Liaoning Nuclear Power Company Ltd owns the plant, with Datang International Power Generation Co holding 20% equity, and State Development and Investment Corporation (SDIC) 10%. The general contractor is China Nuclear Power Engineering Company Ltd (CNPE), and negotiations for an EPC contract for units 1&2 were taking place in December 2011. In October 2010, the Northeast Electric Power Design Institute (NEPDI), Changchun, Jilin, a subsidiary of China Power Engineering Consulting Corporation (CPECC), signed a survey and engineering contract for the plant. When Taohuajiang plant was deferred, the main reactor parts were transferred to Xudapu. Manufacture of the steel containment was launched in July 2013 by Shandong Nuclear Power Equipment Manufacturing Co Ltd (SNPEMC).

Lufeng

CGN Lufeng Nuclear Power Corporation is making efforts to start on the first two units (of six) of the Lufeng (Shanwei) plant in the Tianwei district in eastern Guangdong. An EPC contract was signed with SNERDI in September 2013, environmental approval was in June 2014, and NDRC approval for two AP1000 units was reported in September 2014. It will be a CNPEC project. It is in the 12th Five-Year Plan, site work is under way and construction start in 2015 is expected. The AP1000 plant equipment manufactured for Xianning is being deployed there for units 1&2, and it will be CGN's first AP1000 plant. Investment to June 2014 was CNY 37.4 million. Commercial operation is expected in 2019 and 2020.

Putian & Zhangzhou-Gulei

China Guodian's first nuclear power venture, with CNNC holding 51% of CNNC New Energy Corporation, will initially have two small modular ACP100 reactors, at Putian on the coast in Fujian province, near Xiamen, as a demonstration plant. These are integral PWRs, with passive cooling for decay heat removal. This will be the CNY 5 billion ($788 million) phase 1 of a larger Zhangzhou project. CNNC said that the units could provide electricity, heat and desalination. Construction time is expected to be 36-40 months, starting 2015. It involves a joint venture of three companies for the pilot plant: CNNC as owner and operator, the Nuclear Power Institute of China as the reactor designer and China Nuclear Engineering Group being responsible for plant construction. 
A second proposal is for two ACP100 units on the other side of the peninsula, at Zhangzhou-Gulei, but though approved by SASAC in November 2011, it is stalled due to opposition from local government. CNNC New Energy Corporation (CNNC & Guodian) is seeking alternative sites.

Zhangzhou

The larger project will be undertaken by Nuclear Guodian Zhangzhou Energy Co. Ltd., and will comprise four AP1000 reactors as phase I and two more as phase II. CNNC says it has received preliminary approval, and in May 2014 local government gave approval, with phase 1 costing CNY 54.4 billion. The company was established in November 2011, by CNNC or China Nuclear Power International Inc (51%) and China Guodian Corporation (49%). The proposal was submitted to NDRC in August 2010. 

Hongshiding (Rushan)

In November 2006, an agreement was signed by CNNC to proceed with the first two units of the Hongshiding nuclear plant at Hongshiding in Weihai or Rushan city, Shandong province, costing $ 3.2 billion, with construction to begin in 2009 and first power in 2015. However, it has been deferred. Six units now likely to be Hualong 1, 1150 MWe each, are envisaged at the site, with Shandong Hongshiding Nuclear Power Co. Ltd as developer.

Lianyungang

CGN has several plans in Northern China, and among other possible projects it has applied for several reactors at Lianyungang, Jiangsu province, very close to CNNC’s Tianwan plant. A proposal has been submitted to the NRDC. However, the further development of Tianwan makes it unlikely, and if implemented, it will not proceed before about 2025. It is not included in the above Table or any statistics.

Songjiang

This is to be developed in Shanghai's Songjiang district by CGN with China GD Power Development Co Ltd, a subsidiary of Guodian, and in connection with a framework cooperation agreement with the State Grid Corporation of China. It is not expected to be approved before about 2020.

Sanming 

In October 2009, an agreement was signed by CIAE and CNEIC (a CNNC subsidiary responsible for technology imports) with Russia's Atomstroyexport to start pre-project and design works for a commercial nuclear power plant with two BN-800 fast neutron reactors (referred to as Chinese Demonstration Fast Reactors) at Sanming city, an inland part of Fujian province. A site survey and preliminary feasibility study had been undertaken in 2007-08. CNNC in April 2010 established Sanming Nuclear Power Co Ltd as a joint venture company with the Fujian Investment & Development Corp and local government, and initiated a full feasibility study. 
Construction was due to start in 2013, once an intergovernmental agreement was in place, expected in 2012, but now apparently suspended indefinitely. The local content was targeted at 70%, and the first unit was to be in operation in 2018, with the second following about a year later. A second phase, with units 3&4, was due to commence in 2015. The plant would be similar to the OKBM Afrikantov BN-800 design built in Russia at Beloyarsk 4, which started up in 2014, though this is actually an experimental reactor rather than commercial type. Negotiations on price earlier delayed the project and NIAEP-Atomstroyexport then said it expected the first contracts to be in place at the end of 2014. However, it appears that China's policy regarding fast reactors remains uncertain, and the first commercial demonstration units are now not expected to be on line before 2025.

Inland nuclear power plants

These have been delayed significantly from the dates for the larger units planned before mid-2011. This was announced as being due to concerns regarding possible pollution of rivers. Taohuajiang, Xianning and Pengze are all in the 12th five-year plan to start construction, but the premiere's announcement in October 2012 deferred approvals for inland plants until after 2015. The delay has involved an assertion of central government control over eager provincial governments with their own economic development agendas. NEA approvals are likely to start for these in 2016.
In September 2014 three projects were mentioned as likely first construction starts for 13th five-year plan from 2016: Taohuajiang in Hunan, Pengze in Jiangxi, and Dafan in Hubei.
In June 2015 CNNC signed a strategic cooperation agreement with Sichuan provincial government to promote “large-scale commercial nuclear power reactors and renewable energy generation, nuclear power equipment manufacturing, nuclear technology and innovation platform construction.” Sichuan had earlier promoted Nanchun as a power plant site, and CGN is involved with this – see below.
In September 2015 it was reported that 31 inland sites had cleared preliminary approval by NDRC, and awaited State Council approval.

Taohuajiang

CNNC's Taohuajiang nuclear power plant on the Zi River in Taojiang county,Yiyang city, near Yueyang in inland Hunan province is likely to be China's first inland nuclear power plant. It was expected to start construction in September 2010, and some CNY 3 billion of site works are complete, but construction is delayed to 2015 or 2016. (It is also referred to as the Taohua [peach blossom] River project.) CNNC set up Hunan Taohuajiang Nuclear Power Co Ltd. to build and operate the plant. Initially this was to be 4x1000 MWe at a total cost of CNY 34 billion, but it is now to be a four-unit CAP1000 project costing over CNY 70 billion. The main contractor is China Nuclear Industry 23rd Construction Co Ltd; China Erzhong is contracted to supply the main pressure vessel forgings, and Dongfang Electric Corp will supply other major components. Germany's GEA Group is to construct the cooling tower for unit 1: a natural draft unit some 200 metres high and 160 m in diameter, with 15,000 square metres drenching area. Subsequent towers will have increasing local content.
The project was approved by the NDRC in November 2005, and in 2008 the project was approved for preliminary construction. Site works have been undertaken to the extent of CNY 3.8 billion. The design by SNERDI under SNPTC and SNPDRI was submitted to the NNSA in February 2010 for licensing. A general framework agreement for construction was signed by CNNC with CNPE Corporation as EPC contractor in December 2010. The first unit was originally expected in commercial operation in 2015, and the fourth in 2018. However, after all the inland projects were deferred the reactor components were transferred to Xudapu/Xudabao, and the site workforce was laid off. Construction start is now expected in 2016.

Xianning/Dafan

In August 2008, CGN and Hubei Energy Group Ltd set up the Hubei Nuclear Power Company as a joint venture and announced plans to build a nuclear power plant at Dafan in Xianning city of the inland Hubei province. Site works for this plant (four AP1000 units) have been undertaken to the extent of CNY 3.4 billion. Construction of the first two units was expected to start in 2011, but is delayed to 2016. The reactor pressure vessel for the first unit is contracted to China First Heavy Industries, and the first two 209 metre high cooling towers to Belgium's Hamon Thermal. The cost of four AP1000 reactors is put at CNY 60 billion ($8.8 billion). This would have been CGN's first AP1000 plant, but the equipment has been reassigned to Lufeng. A further phase is estimated to cost CNY 45 billion.
The large pre-assembled modules that will make up the bulk of the new AP1000s are to come from a new inland facility owned by new firm Hubei Nuclear Power Equipment Company.
Reports of a Songzi plant may refer to later stages of Dafan, though possible projects in Yangxin county have been mentioned.
The Hubei Nuclear Power Co is also reported to be planning a four-unit AP1000 plant at Guangshui city in the northeast of the province.

Pengze

CPI's Pengze Nuclear Power Project in Jiangxi province is to have four AP1000 reactors costing CNY 60 billion ($8.8 billion). The site has been prepared for the first two units, and safety and environmental approvals were obtained in May 2009. CPI signed the EPC contract framework for phase 1 (units 1 & 2) in August 2009, the engineering project contract was reported to be between CPI Jiangxi Nuclear Power Co Ltd and CPIC. The equipment procurement was reported to be between CPIC and China Power Complete Equipment. CPI aimed to start construction in 2010, for 2013 start-up, but construction has been delayed, evidently to 2016. Site works amount to CNY 3.4 billion.
The project is inland in Juijiang city, across the Yangtze River from Wangjiang in Anhui province. The cooling towers are being designed by Belgium's Hamon Thermal for the State Nuclear Electric Power Planning Design and Research Institute (SNPDRI). The project has been opposed by Wangjiang in neighbouring Anhui province, which has plans for several nuclear plants iteself, including Wuhu (Fanchang) and Jiyang (Chizhou), with Anqing Congyang and Xuancheng along the Yangtze River also mentioned.  

Wuhu

The Wuhu nuclear plant on the Yangtze River in the Bamaoshan area, Fanchang county, of Anhui province was planned to have four 1000 MWe CPR-1000 units, but is now designated for AP1000s to be constructed in two phases. CGN's proposal for two units of phase 1 has been submitted, some preparatory work has been undertaken and the Anhui Wuhu Nuclear Power Co has been set up, with 51% CGN ownership. The environmental impact statement was released for public comment in January 2010. 

Ningdu/Ganzhou

CNNC New Energy Corp, the joint venture of CNNC (51%) and Guodian Corp, has also signed a preliminary agreement for small modular reactors with Ganzhou city in Jiangxi province.

Xiaomoshan

The Xiaomoshan nuclear power plant on the Yangtze River in Huarong county, Yueyang city, Hunan province (inland), is a priority project for CPI. It will eventually have six AP1000 reactors and be built by Hunan Nuclear Power Company Ltd in two phases. NDRC approval was given in 2006 but as of mid-2010 NNSA approval was awaited. Site preparation has been undertaken and first concrete was expected late in 2010. The cost is put at CNY 70 billion ($10.25 billion) for the first four units, funded by SNPTC and Wuling Electric Power Development Co. (a CPI subsidiary). The Heimifeng pumped storage plant will be associated with it.

Yanjiashan/Wanan/Ji'an

In August 2009, CNNC (51%) signed a joint venture agreement with Jiangxi Ganneng Co. Ltd and Jiangxi Ganyue Expressway Co Ltd (49% between them) setting up Jiangxi Nuclear Power Co to build the Wanan Yanjiashan nuclear power project at Ji'an in the Jiangxi province. CNNC contracted a feasibility study of Yanjiashan nuclear power program in July 2010. Pre-project work was reported as under way in November 2010. (This is also reported as a CPI project.)

Shaoguan

CGN's Shaoguan nuclear plant will comprise four AP1000 reactors and is expected to cost RMB 50 billion. It will be located in Baitu Town of Qujiang District in Shaoguan City, and will be the first inland nuclear power project in Guangdong. The Shaoguan Nuclear Power Co was established in April 2010. 

Zhongxiang

CNNC's Hubei Zhongxiang nuclear power project is at Zhongxiang city in central Hubei, with China Datang. The 5000 MWe plant is undergoing a detailed feasibility study, but further details are unknown.

Cangzhou 

China Huadian plans the Cangzhou Haixing nuclear plant with six AP1000 reactors in Cangzhou city, Hebei province, 90 km inland from Tianjin. A CNY 100 billion investment is envisaged by the China Nuclear Huadian Hebei Nuclear Power Co. CNNP has 51% of the project company, Huadian Power International 39% and Jinto Energy Investment 10%. Initial investment in the two-unit first stage is CNY 8.443 billion ($1.36 billion). In April 2014 the NEA approved the project and ordered site selection to begin, focused on Xiaoshan and Bianzhuang.

Hengfeng/Shangrao

CNNC New Energy Corp, the joint venture of CNNC (51%) and China Guodian Corp, has also signed an agreement for small modular reactors with Hengfeng county, Shangrao city in Jiangxi province.

Nanchun/Nanchong/Sanba

In 2005, Sichuan province proposed Nanchun/Nanchong city east of Chengdu as a suitable site for a nuclear power plant and sought approval for it from the National Development and Reform Commission (NDRC), which was not given, possibly because of seismic concerns. In March 2009, the provincial government signed an agreement with CGN to pursue the plan for a Nanchun nuclear power plant, involving the Nuclear Power Institute of China (NPIC), headquartered in Chengdu. Preliminary plans in 2008 were for a 4000-6000 MWe Sanba nuclear power plant on the Jialing River, at a cost of CNY 25 billion ($3.7 billion), but four Hulaong One units are now proposed. Majority ownership would be CGN.
Another Sichuan agreement for a nuclear power plant project has been signed between CNNC and Yibin city, south of Chengdu. 

Xiangtan

In December 2009, China Huadian Corp signed an agreement with Xiangtan city government in Hunan to undertake studies for a CNY 60 billion power plant comprising four 1250 MWe reactors. A refined proposal was expected in September 2010. This will apparently be the fourth nuclear project for China Huadian.

Longyou/Zhexi

In October 2008 a project proposal was submitted to NDRC by CNNC and Zhejiang Energy Group Co Ltd for a nuclear power plant in Hangzhou, western Zhejiang province, with four AP1000 reactors, though earlier reports had four 1000 MWe units to be built in two phases from late 2010. The proposed site is Tuanshi, Longyou county. Pre-project work was reported as under way in November 2010.

Jingyu

CPI plans to spend CNY 85 billion to build the six-unit Jingyu or Chisong nuclear power plant in Jingyu county near Baishan, in southern Jilin province, with four AP1000 units to be in stage 1. The project is still in the preliminary feasibility stage, though site preparation is under way. Construction start was scheduled for 2012.

Nanyang

To be a six-unit CNNC or CPI plant in Henan province. Pre-project work was reported as under way in November 2010.

Tongren

In July 2014 Guizhou province announced that it had contracted with CGN to build two 1250 MWe reactors at Tongren city for CNY 35 billion, by 2020. The site is being decided among Dejiang, Sinan and Yanhe counties. CGN has also agreed to build two 100 MWe nuclear units for CNY 3 billion, and a 1000 MWe wind farm for CNY 5 billion.
The following inland plants have been proposed but are not understood to be under active consideration in 2015:

Jiutai, Liangjiashan

These two nuclear power plants planned for northern Jilin province close to Changchun, were to be developed by CGN with China GD Power Development Co Ltd, a subsidiary of Guodian, and in connection with a framework cooperation agreement with the State Grid Corporation of China. They are not expected to be approved before about 2020.

Jiyang

Besides Wuhu, CNNC was reported as starting a feasibility study on another four-unit nuclear plant in the Anhui province, at Jiyang in Chizhou city, in December 2008.

Hengyang

In August 2009, CNNC signed an agreement with Hengyang city in Hunan province to build a nuclear power plant there or nearby. This is about 200km south of its Taohuajiang project at Yiyang city in Hunan. China Guodian Corporation, one of the country's largest power producers, is involved in the project.

Ruijin

In April 2015 CNEC announced that its proposal for two commercial 600 MWe HTR units at Ruijin city in Jiangxi province had passed an initial feasibility review. The design is based on work by Tsinghua university, taking shape as the Shidaowan HTR-PM of 210 MWe. Each 600 MWe unit will have three such modules. Ruijin Nuclear Engineering HTR NPP Co, Ltd was established in November 2014. CNEC and the provincial government will apply to NDRC for approval, and hope to start construction in 2017 for grid connection in 2021.

Further Information

Notes

a. According to the China Electricity Council, electricity consumption in 2010 increased 14.6% to 4190 billion kWh, corresponding with a 10% growth in gross domestic product (GDP). Some 3090 billion kWh of this was in industry. China's energy consumption per unit of GDP met a target reduction of 20% from 2005 levels by the end of 2010, according to the National Development and Reform Commission (NDRC). The energy intensity targets for the following five years are expected to be about 17%. [Back]
b. The CNP series of reactors is also referred to as the CP series. [Back]
c. The ACP600 design appears to be an advanced version of the CNP-600. CNNC expects to complete development of the ACP600 design by 2013. [Back]

References

1. Cost of Pollution in China: Economic Estimates of Physical Damages, The World Bank, State Environmental Protection Administration, P. R. China (February 2007) [Back]
2. Platts Power in Asia, 21 January 2010; China's electricity consumption jumps 14.56% in 2010, Xinhua News Agency (17 January 2011) [Back]
3. International Energy Outlook 2009, Energy Information Administration, U.S. Department of Energy, DOE/EIA-0484(2009), available at www.eia.doe.gov/oiaf/ieo/index.html [Back]
4. Maintain nuclear perspective, China told, World Nuclear News (11 January 2011) [Back]
5. APWR and HTR are listed into the national program, CNNC news release (24 February 2006) [Back]
6. Criticality for fast reactor World Nuclear News (22 July 2010) [Back]
8. Unit 3 at Qinshan Phase II Nuclear Power Station begins operation People's Daily Online (22 October 2010) [Back]

General sources

China General Nuclear Power Group website (www.cgnpc.com.cn)
China National Nuclear Corporation website (www.cnnc.com.cn)
Country Analysis Briefs: China, Energy Information Administration, U.S. Department of Energy, available at http://www.eia.doe.gov/emeu/cabs/index.html
Uranium 2007: Resources, Production and Demand, OECD Nuclear Energy Agency and International Atomic Energy Agency, 2008 (ISBN: 9789264047662)
Nicobar Group website (www.nicobargroup.com)
Dynabond PowerTech website (www.dynabondpowertech.com)
Proceedings of the World Nuclear Association's China International Nuclear Symposium, held in Beijing on 23-25 November 2010, and that in Hong Kong in October 2011
Xu Yuming, May 2013, CNEA presentation: China’s nuclear power development in post-Fukushima era
An Analysis of China’s INDC, Fu Sha et al, China National Center for Climate Change Strategy and International Cooperation (NCSC), 2 July 2015